EDITORIAL

E. S. Gorkunov

MAGNETIC STRUCTURAL-PHASE ANALYSIS AS APPLIED TO DIAGNOSING AND EVALUATING THE LIFETIME OF PRODUCTS AND STRUCTURAL COMPONENTS. PART 1

M. Mikhovski

USE OF ELASTIC WAVE REFLECTION MECHANISM FOR DETERMINING CONTACT STRESSES IN SHROUDED TOOLS

D. I. Kryuchkov, A. G. Zalazinsky, I. M. Berezin, O. V. Romanova

MODELLING OF COMPACTION OF TITANIUM COMPOSITE POWDERS

A. S. Smirnov, A. V. Konovalov, O. Yu. Muizemnek

MODELLING AND SIMULATION OF STRAIN RESISTANCE OF ALLOYS TAKING INTO ACCOUNT BARRIER EFFECTS

D. I. Vichuzhanin, V. A. Khotinov, S. V. Smirnov

THE EFFECT OF THE STRESS STATE ON THE ULTIMATE PLASTICITY OF STEEL X80

L. F. Koroleva

NANOPARTICULATE ZIRCONIA-MODIFIED SOLID SOLUTIONS OF ALUMINUM-IRON OXIDES FOR POLISHING TITANIUM METAL

E. S. Gorkunov, R. A. Savrai, A. V. Makarov, S. M. Zadvorkin

MAGNETIC TECHNIQUES FOR ESTIMATING ELASTIC AND PLASTIC STRAINS IN STEELS UNDER CYCLIC LOADING

I. G. Emel'yanov, V. I. Mironov, A. V. Kuznetsov

ON AN APPROACH TO THE EVALUATION OF THE STRENGTH OF A SPATIAL ROD SYSTEM UNDER IMPACT LOADING

A. I. Potapov, S. V. Gladkovsky, E. A. Kokovikhin, D. R. Salikhyanov, D. A. Dvoynikov

DETERMINING THE PLASTIC STRAIN RESISTANCE OF METALLIC MATERIALS ON AN AUTOMATED PLASTOMETRIC COMPLEX

L. A. Maltseva , S. Yu. Mitropolskaya, A. V. Levina

PROGRESS IN ULTRA-DEFORMABLE STAINLESS STEELS FOR MEDICAL TOOL APPLICATION

V. A. Khotinov, V. M. Farber, A. N. Morozova

EVALUATING THE TOUGHNESS OF PIPE STEELS BY IMPACT FRACTURE CURVES

E. S. Gorkunov

MAGNETIC STRUCTURAL–PHASE ANALYSIS. PART II

N. B. Pugacheva

CURRENT TRENDS IN THE DEVELOPMENT OF HEAT-RESISTANT COATINGS BASED ON IRON, NICKEL AND COBALT ALUMINIDES

A. V. Makarov, N. N. Soboleva, I. Yu. Malygina, A. L. Osintseva

THE TRIBOLOGICAL PERFORMANCES OF A NiCrBSi – TiC LASER-CLAD COMPOSITE COATING UNDER ABRASION AND SLIDING FRICTION

A. V. Nesterenko, V. I. Novozhonov, A. G. Zalazinsky

EFFECT OF DEFORMATION PROCESSING ON THE PROPERTIES AND STRUCTURE OF TITANIUM OBTAINED BY PLASTIC DEFORMATION OF HYDROGEN-ALLOYED TITANIUM SPONGE

A. B. Vandyshev, V. A. Kulikov

CALCULATING THE MAIN PARAMETERS OF A MEMBRANE REFORMER WITH A PRODUCTION RATE OF 40 m³/h DESIGNED FOR PRODUCING HIGHLY PURE HYDROGEN FROM NATURAL GAS

S. V. Smirnov, I. A. Veretennikova

COMPARATIVE EVALUATION OF METAL DAMAGE ON THE FREE LATERAL SURFACE OF SINGLE-LAYER AND THREE-LAYER STRIPS UNDER ROLLING

S. V. Gladkovsky, A. I. Potapov, S. V. Lepikhin

STUDYING THE DEFORMATION RESISTANCE OF EP679 MARAGING STEEL

N. B. Pugacheva, D. I. Vichuzhanin, S. V. Smirnov, S. T. Kalashnikov, V. S. Chekushkin, N. P. Antenorova, A. A. Pankratov

STUDYING THE CHANGES IN THE STRUCTURE AND PROPERTIES OF A MAGNESIUM ALLOY AFTER OPERATION AND LONG ANNEALING AT TEMPERATURES OF 50 AND 70 °C

V. A. Chirikov, D. M. Dimitrov, K. P. Kostov

UNIVERSAL EXPERIMENTAL RELATION FOR NATURAL FRIQUENCIES OF TRANSVERSAL VIBRATION OF STUBBY FREE-FREE BEAMS

V. D. Solovei

POSSIBLE VELOCITY DISTURBANCES IN THE LAG ZONE AND ON THE FREE BOUNDARY IN A VISCOPLASTIC STRIP UNDER ROLLING

V. N. Kostin , O. N. Vasilenko, A. M. Porseva, A. A. Kabakova, A. I. Melchakova

MAGNETIC FLUX DISTRIBUTION IN LOCALLY MAGNETIZED TWO-LAYER FERROMAGNETIC OBJECTS

A. N. Pechenkov, V. E. Shcherbinin

DEPENDENCE OF REFLECTED IMPEDANCE ON THE SPEED OF THE RELATIVE MOVEMENT OF THE COIL AND CONDUCTING HALF-SPACE IN EDDY CURRENT MEASUREMENTS

A. N. Pechenkov, V. E. Shcherbinin

INFLUENCE OF CALCULATION ACCURACY ON THE TIME AND RESULTS OF SOLVING THE INVERSE PROBLEM OF MAGNETOSTATIC NONDESTRUCTIVE TESTING. NEED OF PARALLEL COMPUTATIONS

V. B. Vykhodets, T. E. Kurennykh, O. A. Nefedova

APPLICATION OF NUCLEAR REACTION ANALYSIS TO STUDYING HYDROGEN DIFFUSION AND NONSTOICHIOMETRY IN METAL OXIDES

V. V. Chupin, D. E. Chernogubov

STABILITY OF FLEXIBLE SPHERICAL PANELS OF VARIABLE THICKNESS UNDER VARIOUS FIXING CONDITIONS

N. B. Pugacheva, N. S. Michurov, E. B. Trushina

PECULIARITIES OF THE STRUCTURE OF WELDED ALUMINUM ALLOY JOINTS

I. G. Shirinkina, I. G. Brodova, V. V. Astafiev

THERMAL STABILITY OF THE ULTRAFINE AMTs ALUMINUM ALLOY AFTER HIGH STRAIN-RATE DEFORMATION

V. I. Voronin, V. L. Arbuzov, V. I. Bobrovskii, S. E. Danilov, K. A. Kozlov, N. V. Proskurnina, V. V. Sagaradze

PECULIARITIES OF RADIATION-INDUCED PROCESSES IN THE Cr-Ni-Mo AUSTENITIC STEELS STUDIED BY NEUTRON DIFFRACTION

D. K. Orlova, T. I. Chashchukhina, L. M. Voronova, M. V. Degtyarev, Yu. G. Krasnoperova

EFFECT OF IMPURITIES ON DYNAMIC RECRYSTALLIZATION IN COPPER DEFORMED IN BRIDGMAN ANVILS

N. Yu. Frolova, V. I. Zeldovich, I. V. Khomskaya, A. E. Kheifets, E. V. Shorokhov

INFLUENCE OF AGING AND STRAIN ON THE STRUCTURE AND MECHANICAL PROPERTIES OF CHROMIUM-ZIRCONIUM BRONZE

A. V. Dobromyslov, N. I. Taluts

AN ELECTRON-MICROSCOPIC STUDY OF THE DEFORMATION STRUCTURE OF THE 12Kh18N10T STEEL AFTER EXPLOSIVE LOADING IN SPHERICAL SYSTEMS

A. V. Stolbovsky, V. V. Popov, E. N. Popova

STRUCTURE AND THERMAL STABILITY OF TIN BRONZE NANOSTRUCTURED BY HIGH PRESSURE TORSION

O. V. Antonova, O. S. Novikova, A. Yu. Volkov

MICROSTRUCTURE OF AN EQUIATOMIC CuPd ALLOY AFTER SEVERE PLASTIC DEFORMATION AND SUBSEQUENT ORDERING

Yu. V. Khlebnikova, D. P. Rodionov, Yu. N. Akshentsev, L. Yu. Egorova, T. R. Suaridze

INVESTIGATION OF THE STRUCTURE AND TEXTURE OF COPPER-YTTRIUM ALLOY SUBSTRATE TAPES

L. F. Koroleva, M. N. Dobrinskaya, I. S. Kamantsev

DOPED NANOCRYSTALLINE CALCIUM CARBONATE-PHOSPHATE – A BIOMATERIAL FOR BONE REPAIR AND STRENGTHEINING BY DRUG DELIVERY

N. B. Pugacheva, N. S. Michurov, T. M. Bykova

THE STRUCTURE AND PROPERTIES OF THE 30Al-70SiC METAL MATRIX COMPOSITE MATERIAL

S. V. Afanasiev, E. G. Volkova, V. V. Sagaradze

THE STRUCTURE AND PROPERTIES OF HARDENED STAINLESS STEELS WITH A SHAPE MEMORY EFFECT

A. P. Vladimirov

DYNAMIC SPECKLE INTERFEROMETRY OF MICROSCOPIC AND MACROSCOPIC PROCESSES IN DEFORMABLE MEDIA

S. A. Starikov, A. R. Kuznetsov, L. E. Karkina, V. V. Sagaradze

ULTIMATE THEORETICAL STRENGTH OF FCC Fe-Ni ALLOY POLYCRYSTALS

E. G. Volkova, V. V. Sagaradze, I. Yu. Malygina

SPECIAL FEATURES OF THE GRANULAR STRUCTURE OF THE SURFACE ZONE IN PIPE STEEL 12Kh18N12T

L. F. Spevak, O. A. Nefedova, A. V. Makarov, G. V. Samoilova

MATHEMATICAL MODELLING OF PLASMA NITRIDING OF AUSTENITIC STAINLESS STEEL

S. V. Burov, Yu. V. Khudorozhkova

DISTRIBUTIONAL AND MORPHOLOGICAL CHANGES IN EXCESS CEMENTITE DURING DEFORMATION OF HYPEREUTECTOID STEELS

A. V. Makarov, E. S. Gorkunov, L. Kh. Kogan, I. Yu. Malygina, A. L. Osintseva

EDDY-CURRENT TESTING OF THE STRUCTURE, HARDNESS AND ABRASIVE WEAR RESISTANCE OF LASER-HARDENED AND SUBSEQUENTLY TEMPERED HIGH-STRENGTH CAST IRON

A. P. Rubshtein, Yu. V. Korkh, A. B. Vladimirov, A. B. Rinkevich, S. A. Plotnikov

STUDYING NANOCOMPOSITE FILMS WITH A MATRIX-FORMING CARBON BY KELVIN PROBE FORCE MICROSCOPY

EDITORIAL

S. A. Barannikova, G. V. Shlyakhova, L. B. Zuev

STUDYING THE STRUCTURE OF THE ELEMENTS OF THE CABLE OF TECHNICAL SUPERCONDUCTORS BY ATOMIC FORCE MICROSCOPY

D. I. Davydov, S. V. Afanasiev, V. P. Pilyugin, D. A. Shishkin,  P. B. Terent'ev

STRUCTURE AND MAGNETIC PROPERTIES OF A NICKEL-BASED SUPERALLOY AFTER DEFORMATION

N. M. Shkatulyak, E. A. Dragomeretskaya, V. V. Usov,  M. D. Rabkina, A. L. Palienko

TEXTURE AND COERCIVE FORCE OF THE METAL OF FURNACE TUBE COILS

V. E. Gromov, K. V. Morozov, Yu. F. Ivanov, K. V. Aksenova,  O. A. Peregudov, A. P. Semin

FORMATION AND EVOLUTION OF STRUCTURE-PHASE STATES IN RAILS AFTER DRAWN RESOURCE

A. V. Bochkareva, A. G. Lunev , Yu. V. Li, S. A. Barannikova,  L. B. Zuev

THE DIGITAL IMAGE CORRELATION METHOD APPLIED TO STUDYING THE LOCALIZATION OF THE PLASTIC DEFORMATION OF AN ALLUMINUM ALLOY ELECTROLYTICALLY SATURATED WITH HYDROGEN

V. A. Andreyachshenko, Ye. V. Nikurashina, A. S. Baisanov

RESEARCH OF COMPLEX SILICON-ALUMINUM REDUCTANTS FOR SMELTING VANADIUM MASTER ALLOYS

S. A. Bekher, T. V. Sych

RESEARCH METHODOLOGY FOR ESTIMATING THE AMPLITUDE-FREQUENCY CHARACTERISTICS OF PIEZOELECTRIC SENSORS BY USING A MECHANICAL SOURCE OF CONTINUOUS NOISE

A. L. Bobrov

USING THE AE METHOD TO INCREASE THE LIFETIME OF COMPLEX-SHAPED STEEL PARTS

A. V. Gorshkov, E. Y. Prosviryakov

COMPLEX STATIONARY CONVECTION WITH THIRD-KIND BOUNDARY CONDITIONS AT THE BOUNDARIES OF A FLUID LAYER

L. F. Koroleva

MODIFIED NANOPARTICLE OXIDES FOR FINAL POLISHING OF METALS

L. S. Ksendzenko,  A. S. Losev

METHODS FOR DETERMINING THE PERIODICITY PARAMETER OF A MATHEMATICAL MODEL OF MASSIF AROUND A MINE WORKING

A. A. Popkov

PHASE-DIFFERENCE LOCATION USED TO DETERMINE THE DIRECTION OF ACOUSTIC EMISSION SOURCE

V. V. Struzhanov, S. S. Volkov, T. A. Volkova

DEVOLOPMENT OF MICROSTRUCTURE DAMAGE IN STRUCTURALLY HETEROGENEOUS MATERIALS UNDER DEFORMATION

S. S. Stvolova, I. Yu. Zubko

DESCRIPTION OF ELASTIC ANISOTROPY OF QUASICRYSTALLINE STRUCTURES USING A DISCRETE ATOMISTIC APPROACH

S. V. Vetoshkin, Yu. V. Bayandin, O. B. Naimark

OPTIMIZING THE REINFORCEMENT OF A COMPOSITE CYLINDRICAL SHELL AS APPLIED TO DYNAMIC LOADING CONDITIONS

A. B. Vandyshev

ANALYZING THE PARAMETERS OF MEMBRANE CATALYTIC SYSTEMS FOR EXTRACTION OF HIGHLY PURE HYDROGEN FROM HYDROCARBON FEEDSTOCK WITH THE APPLICATION OF MATHEMATICAL MODELING

S. V. Smirnov, M. V. Myasnikova, A. S. Igumnov

DETERMINATION OF THE LOCAL SHEAR STRENGTH OF A LAYERED METAL COMPOSITE MATERIAL WITH A DUCTILE INTERLAYER AFTER THERMOCYCLING

A. N. Mushnikov, S. Yu. Mitropolskaya

EFFECT OF MECHANICAL STRESSES ON THE MAGNETIC CHARACTERISTICS OF PIPELINE STEELS OF DIFFERENT CLASSES

N. B. Pugacheva, L. M. Zamaraev, A. S. Igumnov

STUDYING THE STRUCTURE AND PROPERTIES OF THE MATERIAL OF THE NODES A HONEYCOMB STRUCTURE AFTER DIFFUSION ALUMINIZING

S. V. Smirnov, E. N. Perunov, D. A. Konovalov, S. V. Vyskrebentsev

USING A SPATIAL LOCATION DEVICE FOR EXPRESS DIAGNOSTICS OF CURRENT MECHANICAL PROPERTIES OF METAL STRUCTURES

V. B. Vykhodets, T. E. Kurennykh

SOLUBILITY OF DEUTERIUM IN ALUMINA NANOPOWDERS

M. V. Degtyarev, T. I. Chashchukhina, L. M. Voronova

GRAIN GROWTH IN DYNAMICALLY RECRYSTALLIZED COPPER DURING ANNEALING ABOVE AND BELOW THE TEMPERATURE OF THERMALLY ACTIVATED NUCLEATION

A. P. Nosov, I. V. Gribov, N. A. Moskvina, A. V. Druzhinin, V. I. Osotov, V. A. Bespalov, B. A. Loginov

MAGNETOELECTRIC SENSORS OF MAGNETIC FIELD BASED ON LAMINATED STRUCTURES WITH COMPOSITE MAGNETOSTRICTIVE LAYERS

A. G. Zalazinskiy, D. I. Kryuchkov, A. V. Nesterenko, V. G. Titov

OPTIMIZING THE COMPOSITION OF A COMPOSITE TO BE PRESSED FROM A NONCOMPACT TITANIUM-BASED RAW MATERIAL

A. V. Makarov  N. A. Davydova  I. Y. Malygina  V. V. Lyzhin  L. G. Korshunov

IMPROVING THE THERMAL STABILITY AND HEAT WEAR RESISTANCE OF CARBURIZED CHROMIUM-NICKEL STEEL BY NANOSTRUCTURING FRICTIONAL TREATMENT

L. E. Karkina, A. R. Kuznetsov, I. N. Karkin

ULTIMATE THEORETICAL STRENGTH OF CEMENTITE IN THE (100), (010) AND (001) PLANES

O. P. Shaboldo, Ya. M. Vitorsky, V. V. Sagaradze, E. G. Volkova, N. L. Pechorkina

EFFECT OF THERMOMECHANICAL TREATMENT ON THE FORMATION OF THE STRUCTURE OF HIGH-STRENGTH Nb- AND Ti-BASED ALLOYS

V. A. Shabashov, L. G. Korshunov, A. V. Litvinov, N. V. Kataeva, A. E. Zamatovsky

INCREASING THE DEPTH OF THE NITRIDED LAYER IN THE SURFACE OF AUSTENITIC ALLOYS USING FRICTION TREATMENT

I. A. Veretennikova, D. I. Vichuzhanin, N. S. Michurov, S. V. Smirnov

MECHANICAL PROPERTIES AND FRACTURE BEHAVIOR OF THE "COPPER M1 – STEEL 09G2S" BIMETAL PRODUCED BY EXPLOSION WELDING

A. V. Makarov, S. P. Yakovleva, E. G. Volkova, S. N. Makharova, P. G. Mordovskoy

SPECIAL FEATURES OF THE FORMATION OF THE MICROSTRUCTURE OF THE 09G2S STEEL UNDER CONDITIONS OF COLD AND WARM EQUAL-CHANNEL ANGULAR PRESSING

S. A. Starikov, A. R. Kuznetsov, Yu. N. Gornostyrev, V. V. Sagaradze

DEFORMATION-INDUCED SEGREGATION IN AUSTENITIC ALLOYS

A. Yu. Kaletin, Yu. V. Kaletina

EFFECT OF LOW-TEMPERATURE TEMPERING ON THE PROPERTIES OF STRUCTURAL CARBIDE-FREE BAINITIC STEELS

A. V. Dobromyslov, E. A. Kozlov, N. I. Taluts

DEFORMATION STRUCTURE OF HIGH-PURITY IRON AFTER EXPLOSIVE LOADING IN SPHERICAL SYSTEMS

L. F. Spevak, O. A. Nefedova

PARALLELIZING THE SOLUTION OF THE NONLINEAR HEAT CONDUCTION PROBLEM WITH THE APPLICATION OF THE OPENCL LIBRARY

S. V. Burov, Yu. V. Khudorozhkova

DEPENDENCE OF MECHANICAL AND MAGNETIC PROPERTIES OF HYPEREUTECTOID STEEL ON EXCESS CEMENTITE MORPHOLOGY

S. V. Smirnov , L. M. Zamaraev

ENERGY OF ACTIVATION OF THE VT5 AND VT1-0 TITANIUM ALLOYS UNDER SHORT-TERM CREEP IN AIR AND ARGON

D. I. Davidov, N. N. Stepanova, N. V. Kazantseva, M. B. Rigmant

APPLICATION OF MAGNETIC METHODS TO THE STUDY OF THE STRAIN STATE OF NICKEL-BASED SUPERALLOYS

P. A. Polyakov, A. V. Dolmatov, V. L. Kolmykov, O. V. Romanova, M. N. Zakharov

EFFECT OF SINTERING ON THE STRENGTH OF IRON-BASED POWDER COMPOSITES

S. V. Smirnov, I. A. Veretennikova, E. O. Smirnova, V. М. Fomin, A. А. Filippov, T. A. Brusentseva

STUDYING EPOXY RESIN REINFORCED WITH SILICA DIOXIDE NANOPARTICLES BY MICROINDENTATION

V. V. Nazarov, A. R. Lepeshkin

A METHOD FOR CALCULATING CREEP LIMITS

M. A. Filippov, M. A. Gervasiev, S. M. Nikiforova, Yu. V. Khudorozhkova, G. N. Plotnikov, S. Kh. Estemirova, V. V. Legchilo

CONTROLLING THE STRUCTURE OF WEAR-RESISTANT STEELS 150KhNML AND Kh12MFL BY HIGH-TEMPERATURE QUENCHING AND COLD TREATMENT

E. S. Gorkunov

MAGNETIC EVALUATION OF THE STRUCTURAL AND PHASE CHANGES IN INDIVIDUAL LAYERS OF MULTILAYER PRODUCTS

O. V. Gogoleva, E. S. Petukhova

DEVELOPMENT OF UHMWPE-BASED ANTIFRICTION MATERIALS

V. V. Portnyagina, N. N. Petrova, N. P. Ovchinnikov, A. N. Martynova

STUDYING THE STRUCTURE AND PROPERTIES OF ELASTOMERIC COMPOSITES DESIGNED TO OPERATE UNDER EXTREME CONDITIONS

S. S. Volkov, V. V. Struzhanov

MODELING OF A COMPLETE DEFORMATION DIAGRAM FOR MATERIALS WITH PROPERTIES OF AUXETICS

P. N. Petrova, O. V. Gogoleva, A. G. Argunova, A. L. Fyodorov

ANALYSIS OF THE SCIENTIFIC, TECHNICAL AND PATENT LITERATURE IN THE FIELD OF CREATION OF FROST-RESISTANT POLYMERIC MATERIALS

L. G. Korshunov, N. L. Chernenko, I. G. Brodova, I. G. Shirinkina

EFFECT OF SEVERE PLASTIC DEFORMATION AND OXIDATION ON THE STRUCTURE AND MICROHARDNESS OF THE SILUMIN SURFACE LAYER

A. G. Illarionov, A. A. Popov, S. M. Illarionova, D. V. Gadeev, O. A. Elkina

THE EFFECT OF MICROALLOYING WITH CHROMIUM, HAFNIUM AND YTTRIUM ON THE STRUCTURE AND MECHANICAL PROPERTIES OF THE VT18U HIGH-TEMPERATURE TITANIUM ALLOY

V. A. Mironov, T. F. Mironova, A. N. Andreev

HIGH-RESOLUTION RHYTHMOCARDIOGRAPHY IN CLINICAL NEUROCARDIOLOGY

Yu. Yu. Fedorov, S. N. Popov, A. V. Savvina, S. V. Vasilyev, A. K. Rodionov

EVALUATION OF THE AXIAL STRESSES OF A GAS PIPELINE MADE OF REINFORCED POLYETHYLENE PIPES UNDER CONDITIONS OF PERMAFROST SOILS

M. V. Maisuradze, M. A. Ryzhkov

INVESTIGATION OF THE MICROSTRUCTURAL BANDING IN STEEL 4140

A. N. Shubina, N. A. Babailov

MODELING OF RADIAL FORING OF A HOLLOW INGOT IN MULTIPLE DIE UNITS

N. V. Burmasheva, E. Yu. Prosviryakov

EXACT SOLUTIONS FOR NATURAL CONVECTION OF LAYERED FLOWS OF A VISCOUS INCOMPRESSIBLE FLUID WITH SPECIFIED TANGENTIAL FORCES AND THE LINEAR DISTRIBUTION OF TEMPERATURE ON THE LAYER BOUNDARIES

A. K. Belyaev, D. E. Mansyrev, V. A. Polyanskiy, A. M. Polyanskiy, D. A. Tretyakov, Yu. A. Yakovlev

BOUNDARY LAYER OF HYDROGEN CONCENTRATION UNDER PLASTIC DEFORMATION

S. A. Filin, V. E. Rogalin, I. A. Kaplunov, S. A. Tretiakov

A BRIEF REVIEW OF METHODS FOR INCREASING THE SERVICE LIFE OF LASER METAL OPTICS

V. G. Pushin, E. Yu. Muryshev, E. S. Belosludseva, N. N. Kuranova, А. V. Pushin, A. E. Svirid, A. N. Uksusnikov

THE FEATURES OF STRUCTURAL-PHASE TRANSFORMATIONS IN THE 12Kh18N10T STAINLESS STEEL SUBJECTED TO HIGH-FREQUENCY HYDRODYNAMIC EFFECTS UNDER HIGH PRESSURE

N. B. Pugacheva, Yu. V. Khudorozhkova, E. B. Trushina, A. V. Gerasimova, N. P. Antenorova

REASONS FOR CRACKING OF DIE-FORGED CuZn34Mn3Al2FeNi BRASS BLANKS

S. V. Panin, P. O. Marushchak, I. V. Vlasov, A. V. Eremin, A. V. Byakov, A. S. Syromyatnikova, R. Stankevich

STRUCTURE AND FATIGUE DURABILITY OF 09Mn2Si PIPE STEEL AFTER LONG-TERM OPERATION IN FAR NORTH CONDITIONS

V. B. Vykhodets, T. E. Kurennykh

SOLUBILITY OF DEUTERIUM IN YSZ10 ZIRCONIUM DIOXIDE NANOPARTICLES

A. V. Stolbovsky, V. V. Popov, E. N. Popova, R. M. Falahutdinov

EFFECT OF SEVERE PLASTIC DEFORMATION BY HIGH-PRESSURE TORSION ON THE STRUCTURE AND PROPERTIES OF COPPER AND TIN BRONZE

Yu. N. Saraev, S. V. Gladkovsky, S. V. Lepikhin, D. A. Dvoynikov, I. S. Kamantsev, V. E. Veselova

INFLUENCE OF WELDING TECHNOLOGY ON THE STRUCTURE, MECHANICAL PROPERTIES AND FRACTURE TOUGHNESS OF 09G2S STEEL WELDED JOINTS

R. A. Savrai, A. V. Makarov, I. Yu. Malygina, S. A. Rogovaya, A. L. Osintseva

IMPROVING THE STRENGTH OF THE AISI 321 AUSTENITIC STAINLESS STEEL BY FRICTIONAL TREATMENT

S. F. Dmitriev, A. V. Ishkov, A. O. Katasonov, V. N. Malikov, A. M. Sagalakov

SUPERMINIATURE EDDY-CURRENT TRANSDUCERS FOR THICKNESS STUDIES

L. Yu. Egorova , Yu. V. Khlebnikova , V. P. Pilyugin , E. G. Chernyshev

INITIAL STAGES IN THE EVOLUTION OF THE STRUCTURE OF A ZIRCONIUM PSEUDO-SINGLE CRYSTAL DURING SHEAR DEFORMATION UNDER PRESSURE

A. L. Kazakov, L. F. Spevak, O. A. Nefedova

SIMULTENIOUS APPLICATION OF THE BOUNDARY ELEMENT METHOD AND THE POWER SERIES METHOD FOR SOLVING A TWO-DIMENSIONAL PROBLEM OF HEAT WAVE MOTION

S. V. Smirnov, A. V. Konovalov, M. V. Myasnikova, Yu. V. Khalevitsky, A. S. Smirnov, A. S. Igumnov

A COMPUTATIONAL MODEL OF V95/SiCp (7075/ SiCp) ALUMINUM MATRIX COMPOSITE APPLIED TO STRESS-STRAIN STATE SIMULATION UNDER TENSILE, COMPRESSIVE AND SHEAR LOADING CONDITIONS

N. B. Pugacheva, I. Yu. Malygina, N. S. Michurov, E. I. Senaeva, N. P. Antenorova

EFFECT OF HEAT TREATMENT ON THE STRUCTURE AND PHASE COMPOSITION OF ALUMINUM MATRIX COMPOSITES CONTAINING SILICON CARBIDE

E. V. Mostovshchikova, B. A. Gizhevsky, L. V. Ermakova

IR ABSORPTION SPECTRA OF TiO₂ SUBMICRON POWDERS SYNTHESIZED BY THE COMBUSTION METHOD

Yu. N. Dragoshanskii, V. I. Pudov, Yu. J. Reutov, A. S. Doroshek

PROSPECTS FOR APPLYING LASER-MECHANICAL METHODS TO THE IMPROVEMENT OF THE PHYSICAL PROPERTIES OF TRANSFORMER STEEL

I. V. Blinov, M. A. Milyaev, V. V. Popov

BOTTOM SPIN VALVE BASED ON THE ORDERED Ni–Fe–Mn ANTIFERROMAGNETIC PHASE

A. Yu.Kaletin

MECHANICAL PROPERTIES OF THE 38KhS STEEL AFTER ISOTHERMAL QUENCHING IN THE BAINITIC TEMPERATURE REGION

S. V. Gladkovsky, S. V. Kuteneva, I. S. Kamantsev, R. M. Galeev, D. А. Dvoynikov

FORMATION OF THE MECHANICAL PROPERTIES AND FRACTURE RESISTANCE CHARACTERISTICS OF SANDWICH COMPOSITES BASED ON THE 09G2S STEEL AND THE EP678 HIGH-STRENGTH STEEL OF VARIOUS DISPERSION

V. L. Arbuzov, V. I. Bobrovskii, S. E. Danilov, V. V. Sagaradze

RESISTANCE-MEASUREMENT STUDIES OF THE PECULIARITIES OF THE STRUCTURAL STATE OF CHROMIUM-NICKEL-MOLYBDENUM AUSTENITIC REACTOR STEELS DOPED WITH TITANIUM AND PHOSPHORUS

S. V. Smirnov, I. A. Veretennikova, E. O. Smirnova, A. V. Pestov

ESTIMATING THE EFFECT OF FILLERS ON THE MECHANICAL PROPERTIES OF EPOXY GLUE COATINGS BY MICROINDENTATION

V. P. Pilyugin, T. M. Gapontseva, T. P. Tolmachev, T. I. Chashchukhina, L. M. Voronova, M. V. Degtyarev

EFFECT OF SEVERE DEFORMATION ON THE STRUCTURE, FRACTURE PATTERN AND MECHANICAL PROPERTIES OF REFRACTORY METALS

E. G. Gerasimov, P. B. Terentev, N. N. Shchegoleva, N. V. Mushnikov, B. Campbell, A. N.Pirogov, Y. N. Scryabin, А. Е. Teplykh, S. G. Bogdanov, V. E. Fedorov, N. G. Naumov, A. P. Vokhmyanin, V. V. Bobrovskiy

STRUCTURAL STATE OF NANOCOMPOSITES BASED ON HIGHLY EXFOLIATED GRAPHITE AND 3d-TRANSITION METALS

N. P. Starostin, O. A. Ammosova

ESTIMATED DETERMINATION OF HEAT-AFFECTED ZONES FOR WELDING OF POLYETHYLENE PIPES AT LOW TEMPERATURES

A. A. Semenov

ANALYSIS OF THE STRENGTH OF SHELL STRUCTURES, MADE FROM MODERN MATERIALS, ACCORDING TO VARIOUS STRENGTH CRITERIA

M. V. Rogozhin, V. E. Rogalin, M. I. Krymskii, I. A. Kaplunov

ON THE POSSIBILITY OF INCREASING THE SERVICE LIFE OF HIGH-POWER LASER OPTICS THROUGH THE USE OF POLYCRYSTALLINE DIAMOND WINDOWS WITH A CENTRAL MONOCRYSTALLINE AREA

N. P. Starostin, M. A. Vasilieva

SUBSTANTIATION OF TECHNOLOGICAL OPERATIONS OF WELDING A SADDLE BRANCH TO POLYETHYLENE PIPES AT TEMPERATURES BELOW AVAILABLE

A. I. Gerasimov, E. V. Danzanova, G. V. Botvin

DETERMINATION OF THE FRACTURE TOUGHNESS LIMIT OF POLYPROPYLENE PIPES

I. G. Emelyanov

MECHANICS OF SHELLS AND ITS APPLICATIONS

L. V. Stepanova

ASYMPTOTIC ANALYSIS OF THE STRESS FIELD AT A CRACK TIP IN A LINEARLY ELASTIC MATERIAL: EXPERIMENTAL DETERMINATION OF WILLIAMS EXPANSION COEFFICIENTS

A. P. Polyakov

DYNAMIC POWDER COMPACTION PROCESSES

V. D. Solovei

A VARIATIONAL PRINCIPLE FOR THE DISTURBANCES OF PARTICLE VELOCITIES IN THE FLOW OF A PERFECTLY PLASTIC STRIP UNDER ROLLING

V. V. Privalova, E. Yu. Prosviryakov

EXACT SOLUTIONS FOR A COUETTE–HIEMENZ CREEPING CONVECTIVE FLOW WITH LINEAR TEMPERATURE DISTRIBUTION ON THE UPPER BOUNDARY

S. V. Smirnov, V. A. Khotinov, D. I. Vichuzhanin, O. N. Polukhina, V. M. Farber

THE DIGITAL IMAGE CORRELATION METHOD APPLIED TO STUDYINGTHE PLASTIC FLOWOF THE 08G2BMSTEEL UNDER TENSION

O. Y. Muizemnek, A. V. Konovalov, S. I. Kanyukov

COMPUTER-AIDED INTERSUBJECTIVE ASSIGNMENT OF OVERLAPS FOR SHAFT-TYPE FORGINGS

O. V. Mkrtychev

PREDICTION OF RADIATION RESISTANCE OF NANOSIZED COATINGS

A. G. Zalazinskiy, D. I. Kryuchkov, V. G. Titov

APPLICATION OF THE PARETO CRITERION TO SELECTING THE OPTIMAL COMPOSITION OF THE CHARGE MATERIAL FOR THE MANUFACTURE OF A COMPOSITE BLANK

E. L. Alekseeva, A. K. Belyaev, A. S. Zegzhda, A. M. Polyanskiy, V. A. Polyanskiy, K. P. Frolova, Yu. A. Yakovlev

BOUNDARY LAYER INFLUENCE ON THE DISTRIBUTION OF HYDROGEN CONCENTRATIONS DURING HYDROGEN-INDUCED CRACKING TEST OF STEELS

I. V. Blinov

EFFECT OF HEAT TREATMENT ON THE PHASE COMPOSITION AND MAGNETIC PROPERTIES OF SINGLE-LAYER NANOSTRUCTURES (NI₈₀FE₂₀)_0,6MN_0,4

E. S. Petukhova, P. N. Petrova, M. D. Sokolova, A. L. Fedorov, A. G. Argunova, D. A. Grunenko, E. V. Chikachev

THE STUDY AND DEVELOPMENT OF POLYETHYLENE COMPOSITE ELECTRICALLY CONDUCTIVE MATERIALS

E. M. Reizmunt, S. V. Doronin

MODELING OF TANK DAMAGE SCENARIOS CAUSED BY FOUNDATION SUBSIDENCE

S. A. Chuprakov, I. V. Blinov, M. A. Milyaev, V. V. Popov.

EFFECT OF HEAT TREATMENT ON THE STATE OF INTERLAYER INTERFACES AND MAGNETORESISTIVE PROPERTIES OF Co90Fe10/Cu SUPERLATTICES

S. A. Starikov, A. R. Kuznetsov, V. V. Sagaradze

THEORETICAL MODELS FOR THE DESCRIPTION OF DEFORMATION-INDUCED SEGREGATION IN SUBSTITUTIONAL ALLOYS

I. B. Bobylev, N. A. Zyuzeva, Yu. S. Ponosov

EFFECT OF HYDROGEN INTERCALATION ON THE STRUCTURE OF YBa2Cu3Oy HAVING DIFFERENT OXYGEN CONTENT

V. I. Zeldovich, N. Yu. Frolova, A. E. Kheifets, I. V. Khomskaya, S. M. Dolgih, E. B. Smirnov, A. A. Degtyarev, E. V. Shorokhov

REGULARITIES IN THE FORMATION OF STRUCTURAL STATES AND HYDRODYNAMIC FLOWS IN COPPER AND STEEL AT THE COLLAPSE OF CYLINDRICAL SHELLS UNDER THE EXPLOSION ACTION

A. V. Nasedkin, A. A. Nasedkina, A. N. Rybyanets

FINITE ELEMENT MODELING AND ANALYSIS OF THE EFFECTIVE PROPERTIES OF INHOMOGENEOUSLY POLARIZED POROUS PIEZOCERAMIC MATERIAL WITH PARTIAL METALLIZATION OF PORE SURFACES

O. A. Nefedova, V. B. Vykhodets

A PROCEDURE FOR ONLINE INVESTIGATION OF DEUTERIUM DIFFUSION IN MATERIALS

O. A. Nefedova, V. B. Vykhodets, T. E. Kurennykh

A PROCEDURE FOR STUDYING THE EFFECT OF RADIATION DEFECTS ON THE DIFFUSION COEFFICIENTS OF DEUTERIUM IN METALS

N. B. Pugacheva, T. M. Bykova, E. B. Trushina, I. Yu. Malygina

THE STRUCTURAL STATE AND PROPERTIES OF A DEPOSITED COATING FOR AN INTERNAL COMBUSTION ENGINE VALVE

R. A. Savrai, I. Yu. Malygina, A. V. Makarov, A. L. Osintseva, S. A. Rogovaya, N. A. Davydova

EFFECT OF THE COMPOSITION OF ABSORBING COATINGS ON THE STRUCTURE AND PROPERTIES OF A CAST ALUMINUM ALLOY SUBJECTED TO SURFACE LASER HEAT TREATMENT

S. V. Smirnov, D. A. Konovalov, S. T. Kalashnikov, E. O. Smirnova

STUDYING THE ADHESION STRENGTH AND MECHANICAL PROPERTIES OF COATINGS ON ALUMINUM-MAGNESIUM ALLOY SAMPLES

E. G. Valova-Zaharevskaya, I. L. Deryagina, E. N. Popova, N. E. Khlebova, V. I. Pantsyrny

SPECIAL CHARACTERISTICS OF THE MICROSTRUCTURE OF HIGH-STRENGTH MULTIFILAMENTARY Cu-18Nb COMPOSITES

K. N. Kalashnikov, T. A. Kalashnikova, S. V. Fortuna, A. V. Vorontsov, V. A. Krasnoveykin, A. V. Chumaevskii

ON THE EVOLUTION OF THE MICROSTRUCTURE AND PHASE COMPOSITION IN THE FRICTION STIR WELDED AA 2024 ALLOY

S. M. Zadvorkin, V. P. Shveikin, S. T. Kalashnikov, N. P. Antenorova

ON THE APPLICABILITY OF ELECTROMAGNETIC TESTING METHODS TO DETECTING DISCONTINUITIES IN STEEL STRUCTURES INTENDED FOR OPERATION IN AGGRESSIVE MEDIA UNDER EXTREME LOADS

T. P. Tolmachev, V. P. Pilyugin, A. M. Patselov, A. I. Ancharov, A. V. Inozemtsev

MECHANICAL ALLOYING AND FRACTURE FEATURES OF NON-EQUILIBRIUM Cu-Co ALLOYS

T. A. Brusentseva, E. O. Smirnova, I. A. Veretennikova

STYDYING THE INFLUENCE OF THE NATURE OF THE FILLER ON THE MECHANICAL PROPERTIES OF THE DER-330 EPOXY RESIN

A. M. Polyanskiy, V. A. Polyanskiy, K. P. Frolova, Yu. A. Yakovlev

HYDROGEN DIAGNOSTICS OF METALS AND ALLOYS

А. V. Pushin, E. S. Belosludtseva, N. N. Kuranova, V. G. Pushin

FEATURES OF LOW-TEMPERATURE CRYSTALLIZATION OF Ti2NiCu AMORPHIZED BY THE METHOD OF SPINNING FROM MELT

P. M. Grigoreva, E. N. Vilchevskaya

INFLUENCE OF DIFFUSION MODELS ON CHEMICAL REACTION FRONT KINETICS

A. V. Druzhinin, A. P. Vladimirov, E. V. Tsvetkova

TEORETICAL BASES OF MAGNETOOPTICAL REFRACTOMETRY FOR TRANSPARENT MEDIA

V. A. Milytun, I. V. Gervasyeva

APPLICATION OF THE INSTRUMENTED NANOINDENTATION METHOD TO EVALUATING THE BEHAVIOR OF THE MECHANICAL PROPERTIES OF A Fe-Ga ALLOY WITH INCREASING GALLIUM CONTENT

A. L. Kazakov, L. F. Spevak, O. A. Nefedova

ON THE NUMERICAL-ANALYTICAL APPROACHES TO SOLVING A NONLINEAR HEAT CONDUCTION EQUATION WITH A SINGULARITY

A. P. Nosov, I. V. Gribov, N. A. Moskvina, A. V. Druzhinin, V. I. Osotov

THIN FILM FeGa-FeCoGa/Metglas/LGT STRUCTURES FOR MAGNETOELECTRIC MAGNETIC FIELD SENSORS

D. A. Perminov, A. P. Druzhkov, V. L. Arbuzov

POSITRON ANNIHILATION STUDY OF THE MICROSTRUCTURAL EVOLUTION OF DEFORMED AUSTENITIC IRON-NICKEL ALLOYS

E. A. Putilova, S. M. Zadvorkin, E. S. Gorkunov, A. N. Mushnikov

STUDYING THE EFFECT OF PLASTIC DEFORMATION ON THE MECHANICAL AND MAGNETIC CHARACTERISTICS OF HIGH-STRENGTH BIMETAL MATERIALS INTENDED FOR USE IN THE ARCTIC CLIMATE

А. V. Telegin, Yu. P. Sukhorukov

MAGNETOTRANSMISSION EFFECT IN MAGNETOSTRICTIVE CoFe2O4 FOR THE CASE OF THE VOIGT GEOMETRY

S. E. Danilov, V. L. Arbuzov

SEPARATION OF A SOLID SOLUTION OF A Fe-Ni INVAR ALLOY WITH DIFFERENT TYPES OF POINT DEFECT SINKS UNDER ELECTRON IRRADIATION

V. I. Pudov, Yu. N. Dragoshanskii, A. S. Doroshek

EFFICIENCY OF LOCAL DEFORMATION EFFECTS ON THE MAGNETIC STRUCTURE OF CORE ELEMENTS

I. A. Artemev, M. L. Krasnov, G. M. Rusakov, S. V. Danilov

DETERMINATION OF THERMAL EFFECTS OF DIFFUSIONLESS PHASE TRANSFORMATIONS IN LOW-CARBON LOW-ALLOY STEELS AT HIGH COOLING RATES

P. N. Petrova , O. V. Gogoleva

DEVELOPMENT OF TRIBOTECHNICAL MATERIALS BASED ON MIXTURES OF FLUOROPLASTS

S. V. Doronin, Yu. F. Filippova

MODELING OF THE MULTI-LEVEL PROCESS OF DAMAGE ACCUMULATION IN A REFLECTOR SKELETON WITH AN INHOMOGENEOUS STRUCTURE

E. I. Kuznetsova, M. V. Degtyarev, T. P. Krinitsina, Yu. V. Blinova

THE STRUCTURE OF MgB₂ CERAMICS SYNTHESIZED UNDER QUASI-HYDROSTATIC PRESSING

S. P. Kurilin, V. N. Denisov

THE DEVELOPMENT OF TOPOLOGICAL DIAGNOSTIC METHODS OF ASYNCHRONOUS ELECTRIC MACHINES

V. S. Teplov, V. D. Bessonov

MICROMAGNETIC MODELING OF MAGNETIZATION AUTORESONANCE IN YIG THIN FILMS WITH INDUCED UNIAXIAL ANISOTROPY

I. I. Valov, Yu. P. Kabanov

STUDYING A FORCE ACTION ON A FLAT BOUNDLESS BARRIER FROM A GAS GENERATOR ACTIVATED UNDERWATER

D. V. Novgorodov, V. G. Rybalko, A. S. Shleenkov, A. Yu. Surkov

A STUDY OF GAS PIPELINE EMERGENCY FAILURE

D. V. Novgorodov, V. G. Rybalko, A. S. Shleenkov

THE STRESS STATE INSTABILITY FACTOR AND ITS EFFECT ON THE GROWTH OF STRESS CORROSION CRACKING DEFECTS

V. G. Rybalko, D. V. Novgorodov, A. Yu. Surkov

CONSTRUCTING A MODEL OF THE INTERACTION OF CRACKS IN GAS PIPELINES

N. V. Burmasheva, E. Yu. Prosviryakov

TEMPERATURE FIELD INVESTIGATION IN LAYERED FLOWS OF A VERTICALLY  SWIRLING VISCOUS INCOMPRESSIBLE FLUID UNDER TWO THERMOCAPILLAR FORCES AT A FREE BOUNDARY

V. A. Andreyachshenko

EXPERIENCE OF APPLYING SHOT-TERM INTERMEDIATE ANNEALS IN BACK-PRESSURE EQUAL-CHANNEL ANGULAR PRESSING OF ALUMINUM ALLOYS

S. S. Volkov, V. V. Struzhanov

OPTIMAL WALL THICKNESS OF METAL PIPE ENCASED IN A FIBER POLYMER SHELL

V. D. Solovei

VARIATIONAL PRINCIPLE FOR THE VELOCITIES OF PARTICLES OF A VISCOPLASTIC STRIP UNDER ROLLING

I. N. Tsareva, O. B. Berdnik , S. V. Kirikov

STUDY OF FATIGUE PROCESSES IN THE MATERIAL COMPRESSOR BLADES OF A GAS TURBINE ENGINE AFTER LONG-LAST OPERATING

A. I. Gerasimov, E. V. Danzanova

A METHOD FOR TESTING THE QUALITY OF WELDED JOINTS ON POLYMERIC PIPES

V. I. Mironov, I. G. Emelyanov, D. I. Vichuzhanin, I. S. Kamantsev, V. V. Yakovlev, D. A. Ogorelkov, L. M. Zamaraev

A METHOD FOR EXPERIMENTAL INVESTIGATION OF DEGRADATION PROCESSES IN MATERIALS

V. V. Nazarov

ANALYSIS OF TWO METHODS FOR CALCULATING THE ULTIMATE STRESSES OF CREEP AND CREEP RUPTURE PROCESSES

A. P. Polyakov, P. A. Polyakov

AN EXPERIMENTAL AND ANALYTICAL METHOD FOR CALCULATING THE POWER PARAMETERS OF EXTRUSION OF INCOMPACT MATERIALS

V. V. Privalova, E. Yu. Prosviryakov

VORTEX FLOWS OF A VISCOUS INCOMPRESSIBLE FLUID AT CONSTANT VERTICAL VELOCITY UNDER PERFECT SLIP CONDITIONS

Yu. V. Khalevitsky, A. V. Konovalov, A. S. Partin

CONVERGENCE PATTERNS OF KRYLOV SUBSPACE SOLVERS IN THE SIMULATION OF LARGE ELASTIC-PLASTIC DEFORMATIONS OF HETEROPHASE MEDIA

A. G. Khakimov

DETERMINING THE PARAMETERS OF A PIPE SYSTEM CONTAINING FLUID FLOW BY NATURAL FREQUENCIES OF FLEXURAL VIBRATIONS

E. Yu. Prosviryakov

A SUFFICIENT CONDITION FOR THE ABSENCE OF STRONG AND WEAK DISCONTINUITIES IN THE GAS FLOW IN FLAT CHANNELS

A. V. Stolbovsky, V. V. Popov, R. M. Falakhutdinov, S. A. Murzinova, E. V. Shorokhov, Z. I. Zavyalov, A. A. Degtyarev

EVOLUTION OF THE STRUCTURE OF TIN BRONZE AND COPPER AFTER DYNAMIC COMPRESSION BY THE KOLSKY METHOD USING A SPLIT HOPKINSON PRESSURE BAR

I. V. Vlasov, S. V. Panin, P. O. Marushchak, A. V. Eremin, A. V. Byakov

INFLUENCE OF LONG-TERM OPERATION ON THE STRUCTURE AND IMPACT TOUGHNESS OF THE 09Mn2Si PIPE STEEL

E. Z. Valiev, V. I. Bobrovskii

ON THE SEARCH OF NEW MAGNETIC MATERIALS FOR CRYOGENICS

A. L. Kazakov

ON THE ANALYTICAL CONSTRUCTION OF A HEAT WAVE FOR THE NONLINEAR HEAT EQUATION WITH A SOURCE IN POLAR COORDINATES

A. V. Stolbovsky, V. V. Popov, E. N. Popova, S. A. Murzinova

SPECIFIC FEATURES OF THE GRAIN STRUCTURE IN Ni-Cu ALLOYS AT THE SATURATION STAGE UNDER HIGH-PRESSURE TORSION

S. E. Danilov, V. L. Arbuzov

OBTAINING PURE CARBON-ALLOYED NICKEL

V. V. Privalova, E. Yu. Prosviryakov

THE EFFECT OF TANGENTIAL BOUNDARY STRESSES ON THE CONVECTIVE UNIDIRECTIONAL FLOW OF A VISCOUS FLUID LAYER UNDER THE LOWER BOUNDARY HEATING CONDITION

K. P. Frolova, E. N. Vilchevskaya

COMPARISON OF THE YIELD FUNCTIONS FOR MICROPOLAR MEDIA USING A CYLINDRICAL SAMPLE MODEL

N. V. Burmasheva, E. Yu. Prosviryakov

AN EXACT SOLUTION TO THE DESCRIPTION OF A UNIDIRECTIONAL MARANGONI FLOW OF A VISCOUS INCOMPRESSIBLE FLUID WITH THE NAVIER BOUNDARY CONDITION. VELOCITY FIELD INVESTIGATION

Z. G. Kornilova, G. S. Ammosov

DESIGN AND PROCESS DESCRIPTION OF WELDED JOINTS IN GENERAL-PURPOSE STRUCTURAL STEELS

L. G. Korshunov, N. L. Chernenko

EFFECT OF γ→e MARTENSITIC TRANSFORMATION ON THE TRIBOLOGICAL PROPERTIES OF CHROMIUM–MANGANESE AUSTENITIC STEELS

S. S. Volkov

THE EFFECT OF DAMAGE AT AN ENSEMBLE OF MICROSTRUCTURE POINTS ON THE MARGIN OF SAFETY IN STRUCTURALLY HETEROGENEOUS MATERIALS

V. V. Nazarov

ANALYSIS OF TWO CREEP RUPTURE MODELS

S. M. Kulak, V. F. Novikov, D. D. Mitrofanov

EVALUATION OF STRESSES IN A PRESURIZED VESSEL BY MAGNETOELASTIC DEMAGNETIZATION

V. F. Novikov, K. R. Muratov, S. M. Kulak

APPLICABILITY OF MAGNETIC TRANSDUCERS TO MEASURING STRAINS AND EVALUATING THE SERVICE LIFE OF STRUCTURAL COMPONENTS

S. V. Smirnov, I. A. Veretennikova, D. I. Vichuzhanin, A. V. Pestov

DETERMINATION OF THE ADHESIVE STRENGTH OF A LAMINATED GLUE MATERIAL UNDER THREE-POINT BENDING

A. V. Stolbovsky, V. V. Popov, R. M. Falahutdinov, S. A. Murzinova

SPECIFIC FEATURES OF GRAIN STRUCTURE EVOLUTION IN HPT-NANOSTRUCTURED TIN BRONZE UNDER SUBSEQUENT HEATING

T. P. Tolmachev, V. P. Pilyugin, A. M. Patselov, T. M. Gapontseva, A. V. Plotnikov, R. V. Churbaev, A. V. Inozemtsev

FEATURES OF THE STRAIN-INDUCED DISSOLUTION AND STRUCTURE OF FRACTURE SURFACES IN Cu-Co ALLOYS

V. P. Shveikin

FATIGUE FAILURE OF NATURAL COMPOSITE MATERIALS

D. V. Novgorodov, V. G. Rybalko

FEATURES OF THE EVOLUTION OF CORROSION CRACKING IN GAS FLOW LINES

A. P. Nosov, I. V. Gribov, N. A. Moskvina, A. V. Druzhinin, S. S. Dubinin

SENSORS OF LOW-FREQUENCY MAGNETIC FIELDS BASED ON FeGa-FeCoGa/METGLAS/QUARTZ STRUCTURES

A. S. Shleenkov, O. A. Bulychev, S. A. Shleenkov, D. V. Novgorodov

THE UMD-101MK FLAW DETECTION EQUIPMENT FOR AUTOMATED MAGNETIC INSPECTION OF ELECTRICALLY WELDED SMALL AND MEDIUM PIPES OVER THE ENTIRE WALL THICKNESS AND PERIMETER

N. V. Burmasheva, E. Yu. Prosviryakov

AN EXACT SOLUTION FOR DESCRIBING THE UNIDIRECTIONAL MARANGONI FLOW OF A VISCOUS INCOMPRESSIBLE FLUID WITH THE NAVIER BOUNDARY CONDITION. TEMPERATURE FIELD INVESTIGATION

V. I. Mironov, I. G. Emelyanov, D. I. Vichuzhanin, L. M. Zamaraev, D. A. Ogorelkov, V. V. Yakovlev

EFFECT OF HYDROGENATION TEMPERATURE AND TENSILE STRESS ON THE PARAMETERS OF THE COMPLETE DEFORMATION DIAGRAM FOR STEEL 09G2S

V. V. Struzhanov

A METHOD FOR CALCULATING STRESSES IN A MULTIPLY CONNECTED ELASTIC BODY

D. A. Tretyakov

ACOUSTIC ANISOTROPY AT DIFFERENT STAGES OF THE DEFORMATION PROCESS IN METALS

Yu. N. Dragoshanskii, V. I. Pudov

FORMATION OF MAGNETIC PROPERTIES OF ELECTRICAL STEEL

S. V. Gladkovsky, P. D. Nedzvetsky, D. I. Vichuzhanin, S. V. Kuteneva, S. V. Lepikhin

BRITTLE FRACTURE RESISTANCE AND DAMPING PROPERTIES OF A STEEL-RUBBER METAL-POLYMER COMPOSITE

G. N. Makarov, V. V. Grib, M. G. Shalygin

INCREASING LOAD-CARRYING ABILITY OF GEAR COUPLINGS

B. A. Gizhevskii, M. V. Degtyarev, T. I. Chashchukhina, L. M. Voronova, E. I. Patrakov, N. N. Melnikov, Vas. V. Zapariy, S. V. Ruzaev, Vl. V. Zapariy

FRACTOGRAPHIC STUDY OF THE ARMOR STEEL OF SELF-PROPELLED ARTILLERY GUNS OF THE RED ARMY

N. B. Pugacheva, T. M. Bykova

A STUDY OF BORIDING METHODS, AN ANALYSIS OF THE STRUCTURE AND PROPERTIES OF THE OBTAINED COATINGS

N. V. Burmasheva, E. Yu. Prosviryakov

EXACT SOLUTION FOR DESCRIBING A UNIDIRECTIONAL MARANGONI FLOW OF A VISCOUS INCOMPRESSIBLE FLUID WITH THE NAVIER BOUNDARY CONDITION. PRESSURE FIELD INVESTIGATION

V. V. Struzhanov, A. E. Chaikin

DETERMINING THE MOMENT OF DESTRUCTION OF PROTECTIVE COATINGS ON PIPES AND SPHERICAL VESSELS

V. V. Mishakin, A. V. Gonchar, A. V. Poroshkov, N. V. Semenova

DETERMINATION OF HYDROGEN-INDUCED DAMAGE BY AN ACOUSTIC METHOD

N. V. Burmasheva, E. Yu. Prosviryakov

ISOTHERMAL LAYERED FLOWS OF A VISCOUS INCOMPRESSIBLE FLUID WITH SPATIAL ACCELERATION IN THE CASE OF THREE CORIOLIS PARAMETERS

V. I. Bobrovskii

ON MODELS FOR ESTIMATING THE POST-RADIATION DEFECT STATE OF THE γ‘-PHASE

V. V. Nazarov

APPROXIMATION OF THE CREEP CURVE UP TO THE MOMENT OF NECKING

A. B. Vandyshev

A SYSTEMATIC ANALYSIS OF THE PARAMETERS OF DISK-TYPE MEMBRANE-CATALYTIC DEVICES FOR PRODUCING HIGH-PURITY HYDROGEN FROM METHANE AND DIESEL FUEL

V. B. Vykhodets, T. E. Kurennykh, A. Yu. Nikolaev, A. V. Suzdaltsev, Yu. P. Zaikov

DETERMINATION OF LITHIUM CONTENT IN SOLIDS BY NUCLEAR REACTION TECHNIQUE

I. S. Kamantsev, Yu. N. Loginov, S. V. Belikov, S. I. Stepanov, M. S. Karabanalov, A. I. Golodnov

FRACTURE BEHAVIOR OF CELLULAR STRUCTURES OBTAINED BY SELECTIVE LASER MELTING

V. I. Pegov, I. Yu. Moshkin

APPLYING THE METHOD OF PLANE SECTIONS FOR EVALUATING THE PARAMETERS OF FLIGHT VEHICLES UNDER MULTIPHASE FLOW

N. V. Burmasheva and E. Yu. Prosviryakov

STUDYING THE STRATIFICATION OF HYDRODYNAMIC FIELDS FOR LAMINAR FLOWS OF VERTICALLY SWIRLING FLUID

N. A. Lukin, L. S. Rubin

A PRECISION LOW-FREQUENCY ANALOG-TO-DIGITAL CONVERTER FOR ADVANCED SYSTEMS OF TECHNICAL DIAGNOSTICS AND NONDESTRUCTIVE TESTING

S. P. Kurilin, A. M. Sokolov

FORMATION OF A SYSTEM OF INDICATORS FOR EVALUATING THE CHARACTERISTICS OF ASYNCHRONOUS ELECTRIC MOTORS AT THEIR LIFE CYCLE STAGES

A. L. Kazakov, L. F. Spevak, E. L. Spevak

ON NUMERICAL METHODS FOR CONSTRUCTING BENCHMARK SOLUTIONS TO A NONLINEAR HEAT EQUATION WITH A SINGULARITY

V. I. Pegov, I. Yu. Moshkin

APPLYING AN UPDATED METHOD OF MARKERS TO DEFINING TRANSIENT FORCE IMPACT UNDER MULTIPHASE FLOWING

S. V. Anakhov, B. N. Guzanov, N. B. Pugacheva, T. M. Bykova, A. V. Matushkin

THE INFLUENCE OF THE CONSTRUCTIVE FEATURES OF THE PLASMOTRON ON THE QUALITY OF THE CUT DURING AIR-PLASMA CUTTING OF SHEET METALS

Staff of the IES UB RAS, DReaM Journal Editorial Board

IN MEMORY OF EDUARD STEPANOVICH GORKUNOV

A. S. Smirnov, A. V. Konovalov, V. S. Kanakin

NEURAL NETWORK MODELING OF THE RHEOLOGY OF THE AlMg6 ALLOY UNDER THE DISPERSOID BARRIER EFFECT AND THE INHIBITION OF DYNAMIC RELAXATION PROCESSES

D. A. Perminov

A POSITRON ANNIHILATION STUDY OF DEFECT ACCUMULATION IN PHOSPHORUS- AND TITANIUM-ALLOYED AUSTENITIC STAINLESS STEELS UNDER ELECTRON IRRADIATION AT ROOM TEMPERATURE

Yu.Ya. Reutov

A PECULIARITY OF THE MAGNETIZATION OF A FERROMAGNET BY AN ALTERNATING FIELD

S. E. Danilov, V. L. Arbuzov

PRODUCTION OF PURE NICKEL ALLOYS DOPED WITH SULFUR AND PHOSPHORUS

L. F. Koroleva, L. P. Larionov, M. N. Dobrinskaya

IMPLANTS AND BONE TECHNOLOGY WITH THE USE OF DOPED CALCIUM CARBONATE PHOSPHATES

N. V. Burmasheva, E. Yu. Prosviryakov

A CLASS OF EXACT SOLUTIONS WITH SPATIAL ACCELERATION FOR THE DESCRIPTION OF VISCOUS INCOMPRESSIBLE FLUID FLOWS IN THE FIELD OF MASS FORCES

D. I. Kryuchkov, A. G. Zalazinskiy

MODEL REPRESENTATION OF AN AXISYMMETRIC STEEL-ALUMINUM SAMPLE FOR SIMULATION OF A SEPARATION TEST

A. V. Stolbovsky, V. V. Popov, R. M. Falahutdinov, S. A. Murzinova

EVOLUTION OF THE STRUCTURE OF ANNEALED HAFNIUM BRONZE NANOSTRUCTURED BY HIGH PRESSURE TORSION

V. D. Solovei

THE STRAIN AND STRAIN RATE DEPENDENCE OF THE YIELD STRESS OF ALUMINUM

V. V. Struzhanov

ON ONE PROBLEM OF DETERMINING THE OPTIMAL RESIDUAL STRESS FIELD

B. N. Guzanov, N. B. Pugacheva, T. M. Bykova

EROSION RESISTANCE OF A COMBINED MULTILAYER COATING PROTECTING CRITICAL PARTS OF MODERN GAS TURBINE ENGINES

E. Yu. Prosviryakov

GRAVITATIONAL PRINCIPLE OF MINIMUM PRESSURE FOR INCOMPRESSIBLE FLOWS

N. V. Burmasheva, E. Yu. Prosviryakov

EXACT SOLUTIONS OF THE NAVIER–STOKES EQUATIONS FOR DESCRIBING AN ISOBARIC ONE-DIRECTIONAL VERTICAL VORTEX FLOW OF A FLUID

M. A. Artemov, E. S. Baranovskii

AN EXTREMUM PROBLEM FOR A LINEAR INTEGRO-DIFFERENTIAL SYSTEM DESCRIBING CREEPING FLOWS OF A VISCOELASTIC FLUID

V. V. Nazarov

SELECTION OF COMPLEX EQUIVALENT STRESS FOR TWO DIFFERENT VARIANTS OF THE PLANE STRESS STATE

T. P. Tolmachev, V. P. Pilyugin, A. M. Patselov, N. V. Nikolayeva, A. M. Vlasova

PRESSURE DEPENDENCE OF SHEAR STRESS DURING HIGH-PRESSURE TORSION OF Au-Co ALLOYS IN LIQUID NITROGEN

N. B. Pugacheva , B. N. Guzanov

STUDYING THE CHEMICAL AND PHASE COMPOSITIONS OF A CHROMIUM-NICKEL-MANGANESE STEEL AFTER OPERATION AT ELEVATED TEMPERATURES IN CORROSIVE ENVIRONMENTS

S. G. Bogdanov, I. F. Berger, V. I. Bobrovskii, V. I. Voronin, V. D. Parkhomenko, V. M. Chernov

NEUTRON STUDIES OF THE V-4Ti-4Cr ALLOY

V. V. Struzhanov

ON THE RATIONAL CHOICE OF THE PROPERTIES OF STRUCTURAL ELEMENTS CONSTITUTING UNIDIRECTIONAL COMPOSITIONS

N. V. Burmasheva, E. Yu. Prosviryakov

ANALYSIS OF SPECIFIC KINETIC ENERGY FOR THE BIRIKH–OSTROUMOV SHEAR DIFFUSION FLOW

V. B.Vykhodets, T. E. Kurennykh

IN-SITU NUCLEAR REACTION ANALYSIS

V. V. Chebodaeva, M. B. Sedelnikova, O. V. Bakina, Yu. P. Sharkeev

ELEMENTAL COMPOSITION OF CALCIUM PHOSPHATE COATINGS MODIFIED WITH Fe-Cu NANOPARTICLES

A. L. Nikolaev

THE INFLUENCE OF 2 AT.% Si ADDITION ON THE ANNEALING OF RADIATION-INDUCED DEFECTS IN THE Fe-13Cr ALLOY

A. V. Gorshkov, E. Yu. Prosviryakov

ANALYTICAL STUDY OF THE EKMAN ANGLE FOR THE BENARD–MARANGONI CONVECTIVE FLOW OF VISCOUS INCOMPRESSIBLE FLUID

E. M. Reizmunt, S. V. Doronin, E. V. Moskvichev

INFORMATION AND ANALYTICAL TOOLS FOR ASSESSING THE STRUCTURAL SURVIVABILITY AND SAFETY OF TECHNOLOGICAL EQUIPMENT

V. F. Novikov, K. R. Muratov, S. M. Kulak, A. S. Parakhin, R. A. Sokolov

FEATURES OF MAGNETOSTRICTION IN CARBON STEELS

A. P. Nosov, I. V. Gribov, N. A. Moskvina, A. V. Druzhinin, S. S. Dubinin, V. V. Izyurov, K. A. Merentsova, M. S. Artemiev

LOW-FREQUENCY RESONANCE IN LAMINATED FeGa-FeCoGa/METGLAS/PZT STRUCTURES

R. A. Savrai, S. V. Gladkovsky, S. V. Lepikhin, Yu. M. Kolobylin

APPROACHES TO THE DEVELOPMENT OF WEAR-RESISTANT LAMINATED METAL COMPOSITES

S. E. Danilov

MICROSTRUCTURE EVOLUTION IN A Fe-Ni-Si ALLOY DURING HEAT TREATMENT AND ELECTRON IRRADIATION

А. V. Chumaevskii, D. V. Indoitu, А. V. Sudarikov, А. P. Zykova, А. R. Dobrovolsky, T. A. Kalashnikova, V. Е. Rubtsov, Е. А. Kolubaev

MECHANICAL PROPERTIES AND STRUCTURE FORMATION OF ALUMINUM-SILICON ALLOYS AFTER FRICTION STIR PROCESSING

L. F. Spevak, O. A. Nefedova

PARALLEL TECHNOLOGY FOR SOLVING NONSTATIONARY HEAT CONDUCTION PROBLEMS IN AXISYMMETRIC DOMAINS

A. L. Nikolaev

SHORT-RANGE ORDER IN Fe-Cr ALLOYS IRRADIATED WITH ELECTRONS AT LOW TEMPERATURES AND Cr SOLUBILITY IN α-IRON NEAR 270 K

A. V. Chumaevsky, A. O. Panfilov, E. O. Knyazhev, A. P. Zykova, A. V. Gusarova, K. N. Kalashnikov, A. V. Vorontsov, N. L. Savchenko, S.Y. Nikonov, A. M. Cheremnov, V. E. Rubtsov, E. A. Kolubaev

PRODUCTION OF GRADIENT INTERMETALLIC LAYERS BASED ON ALUMINUM ALLOY AND COPPER BY ELECTRON–BEAM ADDITIVE TECHNOLOGY

D. G. Ksenofontov, V. N. Kostin

IMPLEMENTATION OF DIGITAL METHODS TO ANALYZE EDDY-CURRENT SIGNALS BASED ON THE E14-440 MODULE

I. I. Valov

STUDYING THE PROCESS OF PULSED LOADING OF A WATER-FILLED CYLINDRICAL CONTAINER