A. V. Chumaevsky, A. O. Panfilov, E. O. Knyazhev, A. P. Zykova, A. V. Gusarova, K. N. Kalashnikov, A. V. Vorontsov, N. L. Savchenko, S.Y. Nikonov, A. M. Cheremnov, V. E. Rubtsov, E. A. Kolubaev

PRODUCTION OF GRADIENT INTERMETALLIC LAYERS BASED ON ALUMINUM ALLOY AND COPPER BY ELECTRON–BEAM ADDITIVE TECHNOLOGY

This study presents the results of experimental work on the production and examination of samples of laminated polymetallic products made by wire-feed electron-beam additive technology using the technique of controlled filament feeding into the melt bath. The structure of the products based on M1 copper and AMg5 aluminum alloy combines metallic and intermetallic layers with the presence of a gradient transition between the phases. Inside the layers with a transition structure the distribution of intermetallic phases can be of different types. The microhardness values of the different structural constituents of the samples differ by more than a factor of 16. The mechanical properties of the material of the transition layers are characterized by low strength and low plasticity. In the structure of the intermetallic layers and at the boundary between them the formation of defects in the form of cracks and delaminations is observed.

Acknowledgments: The work was performed according to the Government research assignment for the ISPMS SB RAS, project FWRW-2021-0012.

References:

1. Ghanavati R., Naffakh-Moosavy H. Additive manufacturing of functionally graded metallic materials: A review of experimental and numerical studies. Journal of Materials Research and Technology, 2021, vol. 13, pp. 1628–1664. DOI: 10.1016/j.jmrt.2021.05.022.
2. Panfilov A.O., Knyazhev E.O., Kalashnikova T.A., Kalashnikov Kirill. Manufacturing of Cu-Ni and Fe-Cu-Ni polymetallic materials by the electron-beam additive technology. AIP Conference Proceedings, 2020, vol. 2310, pp. 020242. DOI: 10.1063/5.0034751.
3. Gurianov D.A., Kalashnikov K.N., Gusarova A.V., Chumaevskii Andrey V. Obtaining of the polymetallic samples from Ti-Al and Ti-Cu systems by the electron beam additive manufacturing method. AIP Conference Proceedings, 2019, vol. 2167, pp. 020126. DOI: 10.1063/1.5131993.
4. Chumaevskii Andrey V., Kalashnikov Kirill, Vorontsov Andrey, Zykova Anna. Evolution of microstructure and properties of Fe-Cu, manufactured by electron beam additive manufacturing with subsequent friction stir processing. Materials Letters, 2022, vol. 307, pp. 131023. DOI: 10.1016/j.matlet.2021.131023.
5. Fernandez-Zelaia Patxi, Ledford Christopher, Ellis Elizabeth A.I., Campbell Quinn. Crystallographic texture evolution in electron beam melting additive manufacturing of pure Molybdenum. Materials & Design, 2021, vol. 207, pp. 109809. DOI: 10.1016/j.matdes.2021.109809.
6. Afkhami S., Dabiri M., Habib Alavi S., Timo Björk. Fatigue characteristics of steels manufactured by selective laser melting. International Journal of Fatigue, 2019, vol. 122, pp. 72–83. DOI: 10.1016/j.ijfatigue.2018.12.029.
7. Schopphoven T., Pirch N., Mann S. Statistical/Numerical Model of the Powder-Gas Jet for Extreme High-Speed Laser Material Deposition. Coatings, 2020, vol. 10, pp. 416. DOI: 10.3390/coatings10040416.
8. Zhang G., Xiong H., Yu H., Qin R.Y. Microstructure evolution and mechanical properties of wire-feed electron beam additive manufactured Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy with different subtransus heat treatments. Materials & Design, 2020, vol. 195, pp. 109063. DOI: 10.1016/j.matdes.2020.109063.
9. Xu Junqiang, Zhou Qi, Kong Jian, Peng Yong, Guo Shun, Zhu Jun, Fan Jikang. Solidification behavior and microstructure of Ti-(37−52) at% Al alloys synthesized in situ via dual-wire electron beam freeform fabrication. Additive Manufacturing, 2020, vol. 46, pp. 102113. DOI: 10.1016/j.addma.2021.102113.
10. Osipovich Kseniya, Chumaevskii Andrey V., Gusarova Anastasiya V., Kalashnikov Kirill. Mechanical properties of steel-copper polymetal manufactured by the wire-feed electron-beam additive technology. High Temperature Material Processes, 2020, vol. 24, pp. 91–98.  DOI: 10.1615/HighTempMatProc.2020033790.

Article reference