I. A. Veretennikova, D. I. Vichuzhanin, N. S. Michurov, S. V. Smirnov

MECHANICAL PROPERTIES AND FRACTURE BEHAVIOR OF THE "COPPER M1 – STEEL 09G2S" BIMETAL PRODUCED BY EXPLOSION WELDING

The paper studies the mechanical properties of the "copper M1 – steel 09G2S" bimetal obtained by explosion welding. The features of the fracture of the welded joint after mechanical tests are considered.

References:

1.    Deribas A.A. Fizika uprochneniya i svarki vzryvom [The Physics of Explosive Hardening and Welding]. Novosibirsk, Nauka Publ., 1980, 220 p. (In Russian).
2.    Lysak V.I., Kuzmin S.V. Svarka vzryvom [Explosion Welding]. Moscow, Mashinostroenie Publ., 2005, 543 p. (In Russian).
3.    Kobelev A.G., Lysak V.I., Chernyshev V.N. Proizvodstvo sloistykh kompozitsionnykh mate-rialov [Production of Layered Composite Materials]. Moscow, Intermet Inzhiniring Publ., 2002, 496 p. (In Russian).
4.    Findik F. Recent developments in explosive welding. Material and Design, 2011, vol. 32, iss. 3, pp. 1081–1093. DOI: 10.1016/j.matdes.2010.10.017.
5.    Olson D.L., Siewert T.A., Liu S., Edwards G.R. ASM Handbook. Volume 6. Welding, Braz-ing, and Soldering. ASM International, 1993, 1299 p.
6.    Rybin V.V., Ushanova Je.A., Kuz'min S.V., Lysak V.I. Explosively welded materials bond zone: Morphology and crystallography. Reviews on Advanced Materials Science, 2012, vol. 31, no. 1, pp. 74–77.
7.    Smirnov S.V., Veretennikova I.A., Vichuzhanin D.I. Modeling of delamination in multilayer metals produced by explosive welding under plastic deformation. Computational Continuum Mechanics, 2014, vol. 7, no. 4, pp. 398–411. DOI: 10.7242/1999-6691/2014.7.4.38. (In Russian).
8.    Gladkovsky S.V., Trunina T.A., Kokovikhin E.A., Smirnova S.V., Vichuzhanin D.I. Strength and fracture of a metal composite based on copper M1 and steel 20. Izvestiya Samarskogo nauchnogo tsentra Rossiyskoy akademii nauk, 2010, vol. 12, no. 1 (2), pp. 321–325. (In Russian).
9.    Gladkovsky S.V., Trunina T.A., Kokovikhin E.A., Smirnova S.V., Kamantsev I.S., Borodin E.M. Mechanical properties and structure of layered steel-aluminum composites based on the 09G2S steel produced by pack rolling. Proizvodstvo Prokata, 2012, no. 4, pp. 32–37. (In Russian).
10.    Oliver W.C., Phar G.M. An improved technique for determining hardness and elastic modu-lus using load and displacement sensing indentation experiments. Journals of Materials Research, 1992, vol. 7, iss. 06, pp. 1564–1583. DOI: 10.1557/JMR.1992.1564.
11.    Smirnov S.V., Veretennikova I.A., Kamantsev I.S., Trushina E.B. Studying the fracture of the interface between the layers in a “Steel 08Kh18N10T + Steel 10” bimetal strip, produced by ex-plosive welding, under rolling. Proizvodstvo Prokata, 2014, no. 7, pp. 14–19. (In Russian).
12.    Smirnov S.V., Veretennikova I.A. Anisotropy of the mechanical properties of a “08Cr18Ni10Ti steel – St10 steel” bimetal strip produced by explosion welding. Proizvodstvo Prokata, 2017, no. 1, pp. 30–36. (In Russian).
13.    Smirnov S.V., Shveikin V.P. Plastichnost i deformiruemost uglerodistoy stali [Plasticity and Deformability of Carbon Steel]. Ekaterinburg, UrO RAN Publ., 2008, 256 p. (In Russian).
14.    Zolotorevsky V.S. Mekhanicheskie svoystva metallov [Mechanical Properties of Metals]. Moscow, MISIS Publ., 1998, 400 p. (In Russian).
15.    Veretennikova I.A., Konovalov D.A., Smirnov S.V. Patterns of the change in the mechanical properties of a bimetallic welded joint under plastic deformation. AIP Conf. Proc., 2016, vol. 1785, iss. 1, pp. 040089. DOI: 10.1063/1.4967146.
16.    Grinberg B.A., Ivanov M.A., Rybin V.V., Kuzmin S.V., Lysak V.I., Elkina O.A., Patselov A.M., Antonova O.V., Inozemtsev A.V., Volkova A.Yu., Plotnikov A.V. Dissipative structures in explosion welding. Izvestiya VolgGTU, 2012, no. 14 (101), pp. 27–43. (In Russian).

Article reference