Electronic Scientific Journal
Diagnostics, Resource and Mechanics 
         of materials and structures


advanced search

IssuesAbout the JournalAuthorContactsNewsRegistration

All Issues

All Issues
2024 Issue 2
2024 Issue 1
2023 Issue 6
2023 Issue 5
2023 Issue 4
2023 Issue 3
2023 Issue 2
2023 Issue 1
2022 Issue 6
2022 Issue 5
2022 Issue 4
2022 Issue 3
2022 Issue 2
2022 Issue 1
2021 Issue 6
2021 Issue 5
2021 Issue 4
2021 Issue 3
2021 Issue 2
2021 Issue 1
2020 Issue 6
2020 Issue 5
2020 Issue 4
2020 Issue 3
2020 Issue 2
2020 Issue 1
2019 Issue 6
2019 Issue 5
2019 Issue 4
2019 Issue 3
2019 Issue 2
2019 Issue 1
2018 Issue 6
2018 Issue 5
2018 Issue 4
2018 Issue 3
2018 Issue 2
2018 Issue 1
2017 Issue 6
2017 Issue 5
2017 Issue 4
2017 Issue 3
2017 Issue 2
2017 Issue 1
2016 Issue 6
2016 Issue 5
2016 Issue 4
2016 Issue 3
2016 Issue 2
2016 Issue 1
2015 Issue 6
2015 Issue 5
2015 Issue 4
2015 Issue 3
2015 Issue 2
2015 Issue 1






Yu. V. Zamaraeva, А. V. Razinkin, E. I. Buribaev, А. V. Ponomarev, Е. G. Dymshakova


DOI: 10.17804/2410-9908.2023.6.065-077

Forged pieces made of the as-delivered 1933 alloy for aircraft power units are important semi-finished products manufactured by the Kamensk-Uralsky Metallurgical Works JSC. The production of these parts is challenging due to the variation of their mechanical properties over the volume. Our goal is to find ways of stabilizing and improving the mechanical properties of forged pieces of this type. The simulation of the die-forging of a typical part reveals a 21 % difference in the accumulated amount of strain over the volume of the finished forged parts. Despite the uneven distribution, the minimum strain is sufficient to obtain the required mechanical properties. Estimating the mean normal stress over the volume of a forged piece, we have concluded that it is below the threshold level that ensures that this part is produced without cracking or failure. Experiments have shown that an increase in the holding time in aging stage I and a decrease in stage II result in an increase in the mechanical properties of the product and their uniform distribution depending on the direction.

Acknowledgments: The research was carried out as part of the state assignment (theme Pressure, No. 122021000032-5).

Keywords: the 1933 aluminum alloy, die-forging, finite element method, heat treatment, aging


  1. Fridlyander, I.N. Alyuminievye deformiruemye konstruktsionnye splavy [Aluminum Deformable Structural Alloys]. Metallurgy Publ., Moscow, 1979, 209 p. (In Russian).
  2. Fridlyander, I.N. Aluminum alloys in aircraft in the periods of 1970–2000 and 2001–2015. Tekhnologiya Legkikh Splavov, 2002, 4, 12–17. (In Russian).
  3. Antipov, V.V., Klochkova, Yu.Yu., and Romanenko, V.A. Modern aluminum and aluminum-lithium alloys. Aviatsionnye Materialy i Tekhnologii, 2017, 5, 195–211. DOI: 10.18577/2071-9140-2017-0-S-195-211. (In Russian).
  4. Kablov, E.N., Grinevich, A.V., Lutsenko, A.N., Erasov, V.S., Nuzhnyi, G.A., and Gulina, I.V. Study of the fracture kinetics in structural aluminum alloys subjected to a long-term action of a static load and a corrosive medium using specimens of a new type. Russian Metallurgy (Metally), 2017, 2017, 350–355. DOI: 10.1134/S0036029517040073.
  5. Fridlyander, I.N., Tkachenko, E.A, Senatorova, O.G., and Molostova, I.I. Development and application of high-strength alloys of the Al-Zn-Mg-Cu system for aerospace engineering. In: 75 let. Aviatsionnyye Materialy. Izbrannyye trudy «VIAM» 1932–2007. Yubil. Nauch.-Tekhnich. Sb. [Aeronautical Materials. VIAM Selected Proceedings of 1932–2007: Jubilee Scientific and Technical Collection Dedicated to the 75th Anniversary]. VIAM Publ., Moscow, 2007, pp. 155–163. (In Russian).
  6. Nechaykina, T.A., Blinova, N.E., Ivanov, A.L., Kozlova, O.Yu., and Kozhekin, A.E. Research of the effect of homogenization and quench hardening modes on the structure and mechanical properties of retail rings from alloy V95O.CH.–T2. Trudy VIAM, 2018, 10, 27–36. (In Russian).
  7. Bachurin, A.S., Bobin, K.N., Matveev, K.A., and Kurlaev, N.V. Residual deformation of aircrafts aluminum parts at hardening. Siberian Aerospace Journal, 2013, 14 (3), 119–123. (In Russian).
  8. Nechaykina, T.A., Oglodkov, M.S., Ivanov, A.L., Kozlova, O.Yu., Yakovlev, S.I., and Shlyapnikov, M.A. Features of hardening of wide cladding sheets from V95P.CH. aluminum alloy on a continuous heat treatment line. Trudy VIAM, 2021, 11, 25–33. (In Russian).
  9. Vakhromov, R.O., Tkachenko, E.A., Popova, O.I., and Milevskaya, T.V. Summarizing of the experience of usage and optimization of manufacturing technology semi-finished products of high strength aluminum alloy 1933 for the primary structures of modern aircrafts. Aviatsionnye Materialy i Tekhnologii, 2014, 2, 34–39. (In Russian).
  10. Astashkin, A.I., Babanov, V.V., Selivanov, A.A., and Tkachenko, E.A. Structure and properties of massive forgings with a reduced level of residual stresses made of aluminum alloy 1933sb of balanced composition. Trudy VIAM, 2021, 7 (101), 13–21. DOI: 10.18577/2307-6046-2021-0-7-13-21. (In Russian).
  11. Li, P., Xiong, B., Zhang, Y., Li, Z., Zhu, B., Wang, F., and Liu, H. Quench sensitivity and microstructure character of high strength AA7050. Transactions of Nonferrous Metals Society of China, 2012, 22 (2), 268−274. DOI: 10.1016/S1003-6326(11)61170-9.
  12. Zhang, X., Liu, W., Liu, S., and Zhou, M. Effect of processing parameters on quench sensitivity of an AA7050 sheet. Materials Science and Engineering, A, 2011, 528 (3), 795–802. DOI: 10.1016/j.msea.2010.07.033.
  13. Li, X.M. and Starink, M.J. Identification and analysis of intermetallic phases in overaged Zr-containing and Cr-containing Al−Zn−Mg−Cu alloys. Journal of Alloys and Compounds, 2011, 509 (2), 471−476. DOI: 10.1016/j.jallcom.2010.09.064.
  14. Marlaud, T., Deschamps, A., Bley, F., Lefebvre, W., and Baroux, B. Influence of alloy composition and heat treatment on precipitate composition in Al−Zn−Mg−Cu alloys. Acta Materialia, 2010, 58 (1), 248−260. DOI: 10.1016/j.actamat.2009.09.003.
  15. Vakhromov, R.O., Tkachenko, E.A., Lukinа, E.A., and Selivanov, A.A. Influence of homogenization annealing on structure and properties of ingots from 1933 alloy of Al–Zn–Mg–Cu system. Trudy VIAM, 2015, 11, 3–11. DOI: 10.18577/2307-6046-2015-0-11-2-2. (In Russian).
  16. Galkin, V.I., Golovkina, M.G. Investigation of the effect of hof die forging conditions on formation of mechanical properties of aluminium alloy products. Tekhnologiya Legkikh Splavov, 2016, 1, 138–143. (In Russian).
  17. Vlasov, A.V., Stebunov, S.A., Evsyukov, S.A., Biba, N.V., Shitikov, A.A., ed by A.V. Vlasova. Konechno-elementnoe modelirovanie tekhnologicheskikh protsessov kovki i obyemnoy shtampovki [Finite Element Modeling of Technological Processes of Forging and Die Forging: Textbook]. Izd-vo MGTU im. N.E. Baumana Publ., Moscow, 2019, 384 p. (In Russian).
  18. Elagin, V.I., Zakharov, V.V., and Dritz, A.M. Struktura i svojstva splavov sistemy Al–Zn–Mg [Structure and Properties of Alloys of the Al–Zn–Mg System]. Metallurgiya Publ., Moscow, 1982, 224 p. (In Russian).


Article reference

Improving the Process of Producing Forged Pieces for Power Parts Used in the Aviation Industry / Yu. V. Zamaraeva, А. V. Razinkin, E. I. Buribaev, А. V. Ponomarev, Е. G. Dymshakova // Diagnostics, Resource and Mechanics of materials and structures. - 2023. - Iss. 6. - P. 65-77. -
DOI: 10.17804/2410-9908.2023.6.065-077. -
URL: http://eng.dream-journal.org/issues/content/article_417.html
(accessed: 05/22/2024).


impact factor
RSCI 0.42


MRDMS 2024
Google Scholar



Founder:  Institute of Engineering Science, Russian Academy of Sciences (Ural Branch)
Chief Editor:  S.V. Smirnov
When citing, it is obligatory that you refer to the Journal. Reproduction in electronic or other periodicals without permission of the Editorial Board is prohibited. The materials published in the Journal may be used only for non-profit purposes.
Home E-mail 0+

ISSN 2410-9908 Registration SMI Эл № ФС77-57355 dated March 24, 2014 © IMACH of RAS (UB) 2014-2024, www.imach.uran.ru