V. V. Struzhanov, A. E. Chaikin

DESTRUCTION OF A PROTECTIVE PIPE COATING UNDER CYCLIC LOADING BY INTERNAL PRESSURE

An analytical method has been developed for determining the moment of destruction of thin pipe coatings whose material retains elasticity during cyclic changes in internal pressure. The coating material has the property of strain softening, that is, destruction with increasing deformation occurs as stresses drop. The properties of the coating material are described by a convex-concave potential. Due to damage accumulation resulting from fatigue loading, the properties of the coating material change. Hence, the complete deformation curve degenerates. To determine the moment of destruction, the methods of the mathematical theory of catastrophes are used, which make it possible to find all the equilibrium positions of the system and the point of instability of the deformation process. Due to the degeneration of the properties of the coating material, the catastrophe (loss of stability) approaches the parameters of fatigue loading.

Acknowledgment: The work was performed according to the state assignment, theme No. AAAA-A18-118020790145-0.

References:

1. Andrasic C.P., Parker A.P. Dimensionless stress intensity factors for cracked thick cylinders under polynomial crack face loadings. Engineering Fracture Mechanics, 1984, vol. 19 (1), pp. 187–193. DOI: 10.1016/0013-7944(84)90078-X.
2. Shannon R.W.E. Stress intensity factors for thick-walled cylinders. International Journal of Pressure Vessels and Piping, 1974, vol. 2 (1), pp. 19–29. DOI: 10.1016/0308-0161(74)90013-1.
3. Poston Т., Stewart I. Teoriya katastroph i ee prilozheniya [Poston T., Stewart I. Catastrophe Theory and its Applications, London, San Francisco, Pitman, 1978]. Мoscow, Mir Publ., 1980, 608 p. (In Russian).
4. Gilmore R. Prikladnaya teoriya katastroph. Book 1 [Gilmore R. Catastrophe Theory for Scientists and Engineers, Dover Publications, 1993]. Moscow, Mir Publ., 1984, 350 p. (In Russian).
5. Vil’deman V.E. and Chausov N.G., Conditions of Deformation Failure for Special Configuration Stretched Sample. Zavod. Lab., Diagn. Mater., 2007, vol. 73, No. 10, pp. 55–59. (In Russian).
6. Vil’deman V.E., Tretyakov M.P. Material testing by plotting total deformation curves. J. Mach. Manuf. Reliab., 2013, vol. 42, pp. 166–170. DOI: 10.3103/S1052618813010159.
7. Andreeva E.A. Solution of one-dimensional softening materials plasticity problems. Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.], 2008, iss. 2 (17), pp. 152–160. DOI: 10.14498/vsgtu642. (In Russian).
8. Kadashevich Yu.I., Pomytkin S.P. Investigation of uniaxial and biaxial loadings of softening materials in endochronic theory of inelasticity. Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.], 2012, iss. 1 (26), pp. 110–115. DOI: 10.14498/vsgtu1007. (In Russian).
9. Wildemann V.E., Lomakin E.V. & Tretyakov M.P. Postcritical deformation of steels in plane stress state. Mech. Solids, 2014, vol. 49, pp. 18–26. DOI: 10.3103/S0025654414010038.
10. Struzhanov V.V., Chaikin A.E. Destruction of a Thin-walled Spherical Vessel by Internal Pressure. AIP Conference Proceedings, 2020, vol. 2315, 020044. DOI: 10.1063/5.0036729.
11. Sedov L.I. Mekhanika sploshnoy sredy [Continuum mechanics, vol. 1]. Мoscow, Nauka Publ., 1970, 492 p. (In Russian).
12. Mironov V.I., Bagazeev Yu.M. Mechanical properties of the material at the stage of deformation softening. Vestnik PGTU. Mechanics of composites, 1999, No. 1, pp. 78–85.
13. Struzhanov V.V., Mironov V.I. Tartashnik К.А. On one approach to the calculation of durability under cyclic loading. Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.], 2004, iss. 26, pp. 94–101. DOI: 10.14498/vsgtu184. (In Russian).
14. Struzhanov V.V., Korkin A.V., Chaykin A.E. One approach to determination of the ultimate load-bearing capacity of mechanical systems with softening elements. Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.], 2018, 22 (4), pp. 762–773. DOI: 10.14498/vsgtu1624. (In Russian).
15. Struzhanov V.V. The determination of the deformation diagram of a material with a falling branch using the torsion diagram of a cylindrical sample. Sib. Zh. Ind. Mat., 2012, vol. 15 (1), pp. 138–144. (In Russian).

Article reference