E. S. Gorkunov

MAGNETIC EVALUATION OF THE STRUCTURAL AND PHASE CHANGES IN INDIVIDUAL LAYERS OF MULTILAYER PRODUCTS

Magnetic hysteresis loop distortion occurring during the magnetization reversal of multilayer ferromagnets can be used to evaluate the structural changes and phase transformations in composite product layers with different properties. For practical application, it is proposed either to record the differential magnetic permeability of each layer or to measure the electromotive force in the coil encompassing a product under magnetization reversal by linear alternating current.

References:

1. Potapov I.N., Lebedev V.N., Kobelev A.G., Kuznetsov E.V., Bykov A.A., Kluchnikov R.M. Sloistye metallicheskie kompositsii [Laminated Metal Composites]. M., Metallurgiya Publ., 1986, 216 p. (In Russian).
2. Lakhtin Yu.M., Leontieva V.P. Materialovedenie [Material Science]. M., Mashinostroenie Publ., 1990, 528 p. (In Russian).
3. Gorkunov E.S., Lapidus B.M., Zagainov A.V., Voronov S.A., Bushmeleva G. Y. Application of differential magnetic permeability in the quality control of surface hardening. Soviet Journal of Nondestructive Testing–USSR, 1988, vol. 24, no. 7, pp. 441–446.
4. Gorkunov E.S., Lapidus B.M. Magnetic properties of double-layer ferromagnets as applied to quality control of surface-hardened products. In: Strukturno-fazovye prevrashcheniya v metallakh: problemy prochnosti i plastichnosti [Structural-Phase Transitions in Metals: Strength and Plasticity Problems]. Sverdlovsk, UNTs AN SSSR Publ., 1987, pp. 103-110. (In Russian).
5. Gorkunov E.S Magnetic Methods and Instruments for the Quality-Control of the CaseHardening of Ferromagnetic Steel Objects – (Review). Soviet Journal of Nondestructive Testing–USSR, 1991, vol. 27, no. 1, pp. 1–18.
6. Gorkunov E.S., Lapidus B.M., Zagainov A.B. A method for quality control of multilayer ferromagnetic products. Avtorskoe svidetelstvo no. 1252718 [RF Patent], bul. izobr. no. 31, 1986, p. 182. (In Russian).
7. Shcherbinin V.E., Gorkunov E.S. Magnitnyi control kachestva metallov [Magnetic Quality Control of Metals]. Ekaterinburg, UrO RAN, 1996, 264 p. ISBN 5-7691-0655-7. (In Russian).
8. Dekhtyar V.M., Gorbunova A.M., Baldina L.M., Kasatkina G.M. Magnetic Determination of the Depth of a Hardened Layer. Zavodskaya laboratoriya, 1946, vol. 12, no. 9–10, pp. 808–816. (In Russian).
9. Dekhtyar V.M. On the coercive force of a two-layer cylinder. ZhETF, 1946, iss. 10, pp. 2–7. (In Russian).
10. Mikheev M.N., Gorkunov E.S. Magnitnye metody strukturnogo analiza [Magnetic Methods for Structural Analysis and Nondestructive Testing]. М., Nauka Publ., 1993. 252 p.
11. Kifer I.I., Semenovskaya I.B., Fomin I.N. On the relation between differential permeability and coercive force. Zavodskaya laboratoriya, 1969, no. 10, pp. 1191–1193. (In Russian).
12. Brinksmeier K., Scheider E., Theiner W.A., Tönsholff H.K. Non-destructive testing for evaluating integrity. Annals of the CIRP, 1984, vol. 33, no. 2, pp. 489–509.
13. Gorkunov E.S., Mitropolskaya S.Yu., Groznaya E.M., Mushnikov A.N., Osintseva A.L., Tueva E.A. Effect of Elasto-Plastic Loading on the Magnetic Characteristics of Steel 20 Hardened with Gas Case-Hardening. Russian Journal of Nondestructive Testing, 2011, vol. 47, no. 4, pp. 221–231. DOI: 10.1134/S106183091104005X.
14. Ryzhov N.M., Fakhurtdinov R.S., Smirnov A.E. Cyclic Strength of Steel 16kh3nvfbm-Sh (Vks-5) after Vacuum Carburizing. Metal Science and Heat Treatment, 2010, vol. 52, nos. 1–2, pp. 61–66. DOI: 10.1007/s11041-010-9230-9.
15. Borisenok G.V., Vasiliev L.A., Voroshnin L.G. Khimiko-termicheskaya obrabotka metallov i splavov [Chemical and Heat Treatment of Metals and Alloys]. М., Metallurgiya Publ., 1981, pp. 424. (In Russian).
16. Gorkunov E.S., Mitropol’skaya S.Yu., Zadvorkin S.M., Osintseva A.L., Vichuzhanin D.I. Effect of Laser Surface Hardening on Magnetic Characteristics of a Carbon Steel under Loading. Russian Journal of Nondestructive Testing, 2008, vol. 44, no. 8, pp. 560–565. DOI: 10.1134/S1061830908080081.
17. Gorkunov E.S., Mitropolskaya S.Yu., Osintseva A.L., Vichuzhanin D.I. Magnetic investigation of strains and stresses in surface-hardened materials. Physical Mesomechanics, 2009, vol. 12, iss. 3–4, pp. 190–198. DOI: 10.1016/j.physme.2009.07.012.
18. Gorkunov E.S., Povolotskaya A.M., Tueva E.A., Goruleva L.S., Zadvorkin S.M. Determination of the Magnetic Properties of Separate Zones of Welds and the Width of Welded Joints Based on Magnetic Measurements. Russian Journal of Nondestructive Testing, 2011, vol. 47, no. 9, pp. 577–586. DOI: 10.1134/S1061830911090038.
19. Gorkunov E.S., Zadvorkin S.M., Emel’yanov I.G., Mitropol’skaya S.Yu. Variation of Magnetic Properties of Two-Layer Carbon-Steel Products under Tension. The Physics of Metals and Metallography, 2007, vol. 103, no. 6, pp. 624–632. DOI: 10.1134/S0031918X07060129.
20. Gorkunov E.S., Povolotskaya A.M., Kuleev V.G., Chistyakov V.K., Korobka O.B. Coercive Force of a Package of Steel Sheets with Diff erent Degrees of Magnetic Hardness. Russian Journal of Nondestructive Testing, 2002, vol. 38, no. 5, pp. 331–338. DOI: 10.1023/A:1020960918166.
21. Gorkunov E.S., Emelyanov I.G., Zadvorkin S.M., Mitropolskaya S.Yu. A model of the stressstate state of a two-layer steel product under uniaxial tension. Metally, 2007, no. 1, pp. 78–82. (In Russian).
22. Goldshtein M.I., Grachev S.V., Veksler Yu.G. Spetsialnye stali [Special Steels], М., MISIS Publ., 1999, 408 p. (In Russian).
23. Filippov M.A., Litvinov V.S., Nemirovskiy Y.R. Stali s metastabilnym austenitom [Steels with metastable austenite]. М., Metallurgiya, 1988, 255 p.
24. Gorkunov E.S., Zadvorkin S.M., Putilova E.A., Povolotskaya A.M., Goruleva L.S., Veretennikova I.A., Kamantsev I.S. The Application of Magnetic Structural Phase Analysis for the Diagnostics of the State of a 08X18H10T Steel–C 3 Steel Composite Material and Its Components That Were Subjected to Plastic Deformation. Russian Journal of Nondestructive Testing, 2012, vol. 48, no. 6, pp. 346–356. DOI: 10.1134/S1061830912060022.
25. Gorkunov E.S., Zadvorkin S.M., Putilova E.A. Magnetic estimation of stresses applied to atwo-layer steel C(T)3-steel 08X18H10T composite material during elastoplastic deformation by uniaxial tension. Russian Journal of Nondestructive Testing, 2012, vol. 48, no. 8, pp. 495–504. DOI: 10.1134/S1061830912080050.

Article reference