|
A. G. Zalazinskiy , D. I. Kryuchkov, V. G. Titov
APPLICATION OF THE PARETO CRITERION TO SELECTING THE OPTIMAL COMPOSITION OF THE CHARGE MATERIAL FOR THE MANUFACTURE OF A COMPOSITE BLANK
DOI: 10.17804/2410-9908.2018.3.033-042 The possibility of usingVT-22 alloy powder produced from extrusion waste is considered. It is shown that it is impossible to obtain high-quality pressing by the conventional method of press-sintering. The results of experimental investigations of the mechanical properties of briquettespressed and sintered from compositions consisting of powders produced from the VT-22 high-strength titanium alloy with additives of thePTM-1 titanium powder and the PV-N70Yu30 nickel-aluminum alloy powder are given. A problem is formulated for selecting the optimal composition of the mixture of the composite material providing required mechanical characteristics and cost of the semi-finished products. The Pareto-optimal composition of the composite material charge has been obtained.
Keywords: Pareto-optimal, composite pressing, noncompact titanium-based raw material, density, compressive strength
Article reference
Zalazinskiy A. G., Kryuchkov D. I., Titov V. G. Application of the Pareto Criterion to Selecting the Optimal Composition of the Charge Material for the Manufacture of a Composite Blank // Diagnostics, Resource and Mechanics of materials and structures. -
2018. - Iss. 3. - P. 33-42. -
DOI: 10.17804/2410-9908.2018.3.033-042. -
URL: http://eng.dream-journal.org/issues/content/article_139.html
(accessed: 11/21/2024).
|
|
