V. V. Struzhanov

ON THE RATIONAL CHOICE OF THE PROPERTIES OF STRUCTURAL ELEMENTS CONSTITUTING UNIDIRECTIONAL COMPOSITIONS

A technique is proposed that makes it possible to implement a rational choice of fibers constituting a unidirectional tensile composite. The choice is made in such a way as to avoid catastrophic failure. The tensile properties of the fibers are characterized by complete deformation diagrams with falling branches. It is shown that the fibers must have different properties since it is impossible to avoid a catastrophe (dynamic fracture of the composite) if the properties are identical.

Acknowledgments: The work was performed according to the state assignment on theme No. AAAA-A18-118020790145-0.

References:

1. Bataev A.A., Bataev V.A. Kompozitsionnye materialy: stroenie, poluchenie, primenenie [Composite Materials : Structure, Production, application: Textbook]. Novosibirsk, Izd-vo NGTU Publ., 2002, 384 p. (In Russian).
2. Mikhailin Yu.A. Konstruktsionnye polimernye kompozitsionnye materialy [Structural Polymer Composite Materials]. SPb, Nauchnye Osnovy i Tekhnologii Publ., 2010, 822 p. (In Russian).
3. Matthews F., Rawlings R. Kompozitsionnye materialy i konstruktsii, Engl. transl. [Composite materials. Engineering and science, Cambridge, CRC Press, Woodhead Publishing, 1999, 480 p.]. Moscow, Technosphera Publ., 2004, 407p. (In Russian).
4. Warden K. Novye intellektualnue materialy i konstrukts [New Intellectual Materials and Designs]. Moscow, Technosphere Publ., 2006, 223 p. (In Russian).
5. Pobedrya B.Ye. Mechanics of composite materials [Mekhanika kompozitsionnykh materialov]. MGU Publ., 1984, 336 p. (In Russian).
6. Garishin, O.K. and Lebedev, S.N., Investigation of structure stresses in dispersion-filled elastomeric nanocomposite, Mekh. Kompoz. Mater. Konstr., 2006, vol. 12, No. 3, pp. 289.
7. Zhigun V.I., Plume E.Z. Evaluation of carrying capacity of carbon-carbon composites in plane stress state. Mekhanika kompozitsionnykh materialov i konstruktsiy, 2017, vol. 23, No. 1, pp. 25–40.
8. Khaliulin V.I., Shapaev I.I. Technology of Composite Parts Production. Kazan, KGTU Publ., 2003, 368p. (In Russian).
9. Perepelkin K.E. Armiruyushchie volokna i voloknistye polimernye kompozity [Reinforcing fibers and fibrous polymer composites]. Moscow, NOT Publ., 2009, 658 p. (In Russian).
10. Sedov L.I. Mekhanika sploshnoy sredy [Continuum mechanics, vol. 1]. M, Nauka Publ., 1970, 492p.
11. Poston T. and Stewart I. Teoriya katastrof i ee prilozheniya [Catastrophe Theory and Its Application, London, Pitman, 1978]. Moscow, Mir Publ., 1980. (In Russian).
12. Vildeman V.E., Chausov N.G. Conditions of strain softening upon stretching of the specimen of special configuration. Zavodskaya Laboratoriya. Diagnostika Materialov, 2007, vol. 73, No. 10, pp. 55–59. (In Russian).
13. Wildemann V.E., Tretyakov M.P. Tests of Materials with Construction of Complete Deformations Curves. Probl. Mashinostr. Nadezhn. Mashin, 2013, No. 2, pp. 93–98. (In Russian).
14. Struzhanov V.V., Korkin A.V., Chaikin A.E. One approach to determination of the ultimate load-bearing capacity of mechanical systems with softening elements. Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.]. 2018, vol. 22, No. 4, pp. 762–773. DOI: 10.14498/vsgtu1624. (In Russian).
15. Struzhanov V.V., Mironov V.I. Deformatsionnoe razuprochnenie materiala v elementakh konstruktsiy [Deformational softening of material in structural elements]. Yekaterinburg, Ural Branch of the Russian Academy of Sciences Publ., 1995, 190 p. (In Russian).
16. Struzhanov V.V., Korkin A.V. Regarding stretching process stability of one bar system with softening elements. Vestnik Uralskogo Gosudarstvennogo Universiteta Putey Soobshcheniya, 2016, 3 (31), pp. 4–17. DOI: 10.20291/2079-0392-2016-3-4-17. (In Russian).
17. Pars L. Analytical Dynamics, Engl. transl., Moscow, Mir Publ., 1989, 655 p.
18. Horn R., Johnson C. Matrix analysis, Engl. transl., Moscow, Mir Publ., 1989, 655 p.

Article reference