T. P. Tolmachev, V. P. Pilyugin, A. M. Patselov, N. V. Nikolayeva, A. M. Vlasova
PRESSURE DEPENDENCE OF SHEAR STRESS DURING HIGH-PRESSURE TORSION OF Au-Co ALLOYS IN LIQUID NITROGEN
DOI: 10.17804/2410-9908.2021.3.006-016 Measurements of shear stress were for the first time carried out during mechanical alloying by high-pressure torsion of a gold-cobalt powder mixture at cryogenic temperature under various pressures. The pressures were about 5, 8, 10, and 12 GPa. The Au-Co system is characterized by limited solubility and different properties of the constituents. It has been found that, in comparison with the data obtained for torsion at room temperature, the shear stress values are higher both at the stage of initial intensive growth and subsequently, upon reaching saturation. With an increase in the pressure of low-temperature torsion, a corresponding increase in resistance to shear strain is observed at all the stages of processing. In this case, the shape of the curves at each new pressure changes, as does the staging of the strain dependence. This reflects the extreme heterogeneity of the phase composition and structure formation in the non-equilibrium alloy. The most intense reflections in the X-ray diffractogram correspond to a supersaturated fcc solid solution of cobalt based on gold. Also as a result of mechanical alloying, the components of the system are evenly distributed on the fracture surface of the alloy.
Acknowledgments: The research was financially supported by the RFBR under project No. 19-32-60039 and partially under the state assignment from the Ministry of Education and Science of the Russian Federation (theme Pressure, No. AAAA-A18-118020190104-3). The materials were produced and processed at the IMP UB RAS, Ekaterinburg. The electron microscope investigations were made with the use of the equipment of the Testing Center of Nanotechnology and Advanced Materials shared access center at the IMP UB RAS, Ekaterinburg. Keywords: mechanical alloying, high-pressure torsion, cryogenic deformation, Au-Co system of limited solubility, in-situ shear stress vs strain References:
- Okamoto H., Massalski T.B., Hasebe M., Nishizawa T. The Au-Co (Gold-Cobalt) system. Bulletin of Alloy Phase Diagrams, 1985, vol. 6, pp. 449–454. DOI: 10.1007/BF02869509.
- Barabash O.M., Koval Yu.N. Struktura i svoystva metallov i splavov [Structure and Properties of Metals and Alloys]. Kiev, Naukova Dumka Publ., 1986, 599 p. (In Russian).
- Miedema A.R., De Chatel P.F., De Boer F.R. Cohesion in alloys – fundamentals of a semi-empirical model. Physica B, 1980, vol. 100, pp. 1–28. DOI: 10.1016/0378-4363(80)90054-6.
- M. E. Drits, ed. Svoystva elementov [Properties of Elements: A Handbook]. Moscow, Metallurgiya Publ., 1985. (In Russian).
- Yin J., Chen G., Tang H., Qu X. Athermal ω phase transformation from β in Ti-28Ta driven by ultra-rapid quenching. International Journal of Refractory Metals and Hard Materials, 2020, vol. 92, pp. 105250. DOI: 10.1016/j.ijrmhm.2020.105250.
- Meng X., Zhang D., Zhang W., Qiu C., Liang G., Chen J. Microstructure and mechanical properties of a high-Zn aluminum alloy prepared by melt spinning and extrusion. Journal of Alloys and Compounds, 2020, vol. 819, pp. 152990. DOI: 10.1016/j.jallcom.2019.152990.
- Belkacemi L.T., Meslin E., Décamps B., Crocombette J.-P., Tissot O., Vandenberghe T., Desgardin P., Sauvage T., Berthier C. Role of displacement cascades in Ni clustering in a ferritic Fe-3.3 at%Ni model alloy: Comparison of heavy and light particle irradiations. Scripta Materialia, 2020, vol. 188, pp. 169–173. DOI: 10.1016/j.scriptamat.2020.07.031.
- Tejeda-Ochoa A., Kametani N., Carreño-Gallardo C., Ledezma-Sillas J.E., Adachi N., Todaka Y., Herrera-Ramirez J.M. Formation of a metastable fcc phase and high Mg solubility in the Ti-Mg system by mechanical alloying. Powder Technology, 2020, vol. 374, pp. 348–352. DOI: 10.1016/j.powtec.2020.07.053.
- Dobromyslov A.V., Taluts N.I., Pilyugin V.P. Severe plastic deformation by high-pressure torsion of Hf and Hf-Ti alloys. International Journal of Refractory Metals and Hard Materials, 2020, vol. 93, pp. 105354. DOI: 10.1016/j.ijrmhm.2020.105354.
- Sun J., Ke Q., Chen W. Material instability under localized severe plastic deformation during high speed turning of titanium alloy Ti-6.5AL-2Zr-1Mo-1V. Journal of Materials Processing Technology, 2019, vol. 264, pp. 119–128. DOI: 10.1016/j.jmatprotec.2018.09.002.
- Bridgman P.W. Effects of High Shearing Stress Combined with High Hydrostatic Pressure. Physical Review, 1935, vol. 48, pp. 825–847. DOI: 10.1103/PhysRev.48.825.
- Zhilyaev A.P., Langdon T.G. Using high-pressure torsion for metal processing: Fundamentals and applications. Progress in Materials Science, 2008, vol. 53, pp. 893–979. DOI: 10.1016/j.pmatsci.2008.03.002.
- Glezer A., Kozlov E., Koneva N., Popova N., Kurzina I. Plastic Deformation of Nanostructured Materials, Boca Raton, CRC Press, 2017. DOI: 10.1201/9781315111964.
- Teplov V.A., Pilugin V.P., Gaviko V.S., Chernyshov E.G. Non-equilibrium solid solution and nanocrystal structure of Fe–Cu alloy after plastic deformation under pressure. Philosophical Magazine B, 1993, vol. 68, pp. 877–881, DOI: 10.1080/13642819308217944.
- Nomura R., Uesugi K. Note: High-pressure in situ x-ray laminography using diamond anvil cell. Review of Scientific Instruments, 2016, vol. 87, pp. 046105. DOI: 1063/1.4948315.
- Towle L.C., Riecker R.E. Shear Strength of Grossly Deformed Solids. Science, 1969, vol. 163, pp. 41–47. DOI: 10.1126/science.163.3862.41.
- Sundeev R.V., Shalimova A.V., Glezer A.M., Pechina E.A., Gorshenkov M.V., Nosova G.I. In situ observation of the “crystalline⇒amorphous state” phase transformation in Ti2NiCu upon high-pressure torsion. Materials Science and Engineering: A, 2017, vol. 679. pp. 1–6. DOI: 10.1016/j.msea.2016.10.028.
- Sundeev R.V., Shalimova A.V., Sitnikov N.N., Chernogorova O.P., Glezer A.M., Presnyakov M.Y., Karateev I.A., Pechina E.A., Shelyakov A.V. Effect of high-pressure torsion on the structure and properties of the natural layered amorphous-crystalline Ti2NiCu composite. Journal of Alloys and Compounds, 2020, vol. 845, pp 156273. DOI: 10.1016/j.jallcom.2020.156273.
- Tolmachev T.P., Pilyugin V.P., Ancharov A.I., Chernyshov E. G., Patselov A. M. The formation, structure, and properties of the Au–Co alloys produced by severe plastic deformation under pressure. The Physics of Metals and Metallography, 2016, vol. 117, pp. 135–142. DOI: 10.1134/S0031918X16020125.
- Tolmachev T.P., Pilyugin V.P., Patselov A.M., Plotnikov A.V., Churbaev R.V. Shear stress in high-pressure torsion and vickers hardness of Au-Co alloys. AIP Conference Proceedings, 2020, vol. 2315, pp. 040046. DOI: 10.1063/5.0036671.
- Tolmachev T.P., Pilyugin V.P., Patselov A.M. Solov’eva Yu.V., Churbaev R.V., Plotnikov A.V. Structural features of the Au-Co alloy after mechanical alloying at cryo- and room temperatures according to X-ray diffractometry. Russian Physics Journal, 2021. (In press).
Article reference
Pressure Dependence of Shear Stress During High-Pressure Torsion of Au-Co Alloys in Liquid Nitrogen / T. P. Tolmachev, V. P. Pilyugin, A. M. Patselov, N. V. Nikolayeva, A. M. Vlasova // Diagnostics, Resource and Mechanics of materials and structures. -
2021. - Iss. 3. - P. 6-16. - DOI: 10.17804/2410-9908.2021.3.006-016. -
URL: http://eng.dream-journal.org/issues/2021-3/2021-3_322.html (accessed: 12/02/2024).
|