Electronic Scientific Journal
 
Diagnostics, Resource and Mechanics 
         of materials and structures
Рус/Eng  

 

advanced search

IssuesAbout the JournalAuthorContactsNewsRegistration

2019 Issue 5

All Issues
 
2024 Issue 1
 
2023 Issue 6
 
2023 Issue 5
 
2023 Issue 4
 
2023 Issue 3
 
2023 Issue 2
 
2023 Issue 1
 
2022 Issue 6
 
2022 Issue 5
 
2022 Issue 4
 
2022 Issue 3
 
2022 Issue 2
 
2022 Issue 1
 
2021 Issue 6
 
2021 Issue 5
 
2021 Issue 4
 
2021 Issue 3
 
2021 Issue 2
 
2021 Issue 1
 
2020 Issue 6
 
2020 Issue 5
 
2020 Issue 4
 
2020 Issue 3
 
2020 Issue 2
 
2020 Issue 1
 
2019 Issue 6
 
2019 Issue 5
 
2019 Issue 4
 
2019 Issue 3
 
2019 Issue 2
 
2019 Issue 1
 
2018 Issue 6
 
2018 Issue 5
 
2018 Issue 4
 
2018 Issue 3
 
2018 Issue 2
 
2018 Issue 1
 
2017 Issue 6
 
2017 Issue 5
 
2017 Issue 4
 
2017 Issue 3
 
2017 Issue 2
 
2017 Issue 1
 
2016 Issue 6
 
2016 Issue 5
 
2016 Issue 4
 
2016 Issue 3
 
2016 Issue 2
 
2016 Issue 1
 
2015 Issue 6
 
2015 Issue 5
 
2015 Issue 4
 
2015 Issue 3
 
2015 Issue 2
 
2015 Issue 1

 

 

 

 

 

Z. G. Kornilova, G. S. Ammosov

DESIGN AND PROCESS DESCRIPTION OF WELDED JOINTS IN GENERAL-PURPOSE STRUCTURAL STEELS

DOI: 10.17804/2410-9908.2019.5.040-047

Ensuring the durability and longevity of welded joints in metallic structures is an important problem of life support, especially in the conditions of the North. Welded joints are the crucial areas reducing resistance to brittle failure, and heat-affected zones (HAZ) are their weakest sites in terms of cold resistance. Thermokinetic diagrams and diagrams of anisothermal decay of austenite (ADA) are used for the determination of the structure composition and mechanical characteristics of the HAZ metal in the welding of many structural steels for various purposes. To choose optimum rates of cooling by preheating of products to be welded, the structure composition and mechanical characteristics of the HAZ metal, we use a carbon equivalent Ce. Besides, in terms of the effect of design and process factors on the formation of welded joints, the paper shows the necessity of controlling welding consumables when welding general-purpose steels.

Keywords: welded joint, brittle failure, defect, crack, heat-affected zone, deposit rate factor, heat input

References:

  1. Antonov A.A, Yakovlev Yu.A., Ammosov A.P. Estimation of the corrosion damageability of the metal of a steam pipeline that has worked its design life. In: Welding and Safety: Materials of the Scientific Research and Production Association, October 11–12, 2012, vol. 1. Yakutsk, Offset Publ., 2012, pp. 264–66. (In Russian).

  2. Andriyashin V.A., Kostyuchenko A.A., Komarov A.I., Vorob'ev V.V., Andriyashin V.A. Long-Term Inside Corrosion Attack of an Oil Main Operation. Protection of Metals, 2006, vol. 42, no. 1, pp. 46–50. DOI: 10.1134/S0033173206010085.

  3. Ammosov A.P., Ammosov G.S., Aminov T.Sh., Ilin G.Yu., Antonov A.A. Corrosive damageability of the reservoir welded joints. Svarochnoe Proizvodstvo, 2008, no. 7, pp. 24–28. (In Russian).

  4. Vasiliev V.G., Dovzhenko V.A., Malevsky Yu.B. Residual austenite in welded joints of low-carbon low-alloy structural steels. Avtomaticheskaya Svarka, 1978, no. 8, pp. 5–8. (In Russian).

  5. Seyffarth P., Kuscher G. Schweiss-ZTV-Schaubilder, Berlin, VEB Verlag Technik, 1982.

  6. Marochnik staley i splavov [Register of Steels and Alloys, ed. by A.S. Zubchenko]. Moscow, “Mashinoctroenie” Publ., 2001. (In Russian).

  7. Ammosov A.P., Kornilova Z.G. Controlling the consumption of welding consumables in welding low-alloy pipe steels. Welding Production, 2006, vol. 20, iss. 8, pp. 665–668. DOI: 10.1533/wint.2006.3673.

  8. Zakharova I.V., Chichkarev E.A., Vasiliev V.G., Trotsan A.I., Dejneka A.Ya., and Kiryukhin O.S. Structure and properties of HAZ metal of low-alloyed pipe steels modified with calcium. The Paton Welding Journal, 2001, no. 8, pp. 14–17. (In Russian).

  9. Аmmosov A.P., Kornilov Z.G. Consumption of electrodes in manual arc welding of metal structures. Welding International, 2004, vol. 18, iss. 6, pp. 478–479. DOI: 10.1533/wint.2004.3306.

  10. Panashchenko N.I., Masur A.A., Parnau A.K., Beynish A.M. The methods of calculating the consumption of coated electrodes and electric energy in the manufacture of welded structures. Avt. Svarka, 1995, no. 8, pp. 39–46. (In Russian).

  11. Fedotova M.A., Larionov V.P. et al. Structural Transformations and Properties of Materials in Welding. YaNTs SO AN SSSR, Yakutsk, 1991, 25 p. (In Russian).

  12. Tararychkin I.A. Optimisation of the shape of edge preparation in narrow-gap arc welding Optimization of a form of cutting of edges at arc welding in a narrow gap. Svar. Proiz., 2001, no. 10, pp. 21–23. (In Russian).


PDF      

Article reference

Kornilova Z. G., Ammosov G. S. Design and Process Description of Welded Joints in General-Purpose Structural Steels // Diagnostics, Resource and Mechanics of materials and structures. - 2019. - Iss. 5. - P. 40-47. -
DOI: 10.17804/2410-9908.2019.5.040-047. -
URL: http://eng.dream-journal.org/issues/2019-5/2019-5_225.html
(accessed: 03/29/2024).

 

impact factor
RSCI 0.42

 

MRDMS 2024
Google Scholar


NLR

 

Founder:  Institute of Engineering Science, Russian Academy of Sciences (Ural Branch)
Chief Editor:  S.V. Smirnov
When citing, it is obligatory that you refer to the Journal. Reproduction in electronic or other periodicals without permission of the Editorial Board is prohibited. The materials published in the Journal may be used only for non-profit purposes.
Contacts  
 
Home E-mail 0+
 

ISSN 2410-9908 Registration SMI Эл № ФС77-57355 dated March 24, 2014 © IMACH of RAS (UB) 2014-2024, www.imach.uran.ru