Electronic Scientific Journal
 
Diagnostics, Resource and Mechanics 
         of materials and structures
Рус/Eng  

 

advanced search

IssuesAbout the JournalAuthorContactsNewsRegistration

2016 Issue 5

All Issues
 
2024 Issue 5
 
2024 Issue 4
 
2024 Issue 3
 
2024 Issue 2
 
2024 Issue 1
 
2023 Issue 6
 
2023 Issue 5
 
2023 Issue 4
 
2023 Issue 3
 
2023 Issue 2
 
2023 Issue 1
 
2022 Issue 6
 
2022 Issue 5
 
2022 Issue 4
 
2022 Issue 3
 
2022 Issue 2
 
2022 Issue 1
 
2021 Issue 6
 
2021 Issue 5
 
2021 Issue 4
 
2021 Issue 3
 
2021 Issue 2
 
2021 Issue 1
 
2020 Issue 6
 
2020 Issue 5
 
2020 Issue 4
 
2020 Issue 3
 
2020 Issue 2
 
2020 Issue 1
 
2019 Issue 6
 
2019 Issue 5
 
2019 Issue 4
 
2019 Issue 3
 
2019 Issue 2
 
2019 Issue 1
 
2018 Issue 6
 
2018 Issue 5
 
2018 Issue 4
 
2018 Issue 3
 
2018 Issue 2
 
2018 Issue 1
 
2017 Issue 6
 
2017 Issue 5
 
2017 Issue 4
 
2017 Issue 3
 
2017 Issue 2
 
2017 Issue 1
 
2016 Issue 6
 
2016 Issue 5
 
2016 Issue 4
 
2016 Issue 3
 
2016 Issue 2
 
2016 Issue 1
 
2015 Issue 6
 
2015 Issue 5
 
2015 Issue 4
 
2015 Issue 3
 
2015 Issue 2
 
2015 Issue 1

 

 

 

 

 

A. G. Zalazinskiy, D. I. Kryuchkov, A. V. Nesterenko, V. G. Titov

OPTIMIZING THE COMPOSITION OF A COMPOSITE TO BE PRESSED FROM A NONCOMPACT TITANIUM-BASED RAW MATERIAL

DOI: 10.17804/2410-9908.2016.5.039-048

The paper studies the mechanical properties of pressed and sintered samples made of titanium-based powders. Recommendations on the selection of the optimal composition of the composite material are given on the basis of the analysis of the density and compressive strength of the pressed pieces. The optimal composition of the composite material is obtained by optimizing the density, compressive strength, quality, and cost of the pressed pieces.

Keywords: optimization, pressing of composite material, noncompact titanium-based raw material, density, compressive strength

References:

  1. Ilyin A.A., Kolachev B.A., Polkin I.S. Titanovye splavy. Sostav, struktura, svoystva. Spravochnik [Titanium Alloys. Composition, Structure, and Characteristics: reference book]. M., VILS-MATI Publ., 2009, 520 p. (In Russian).
  2. Plavka i litie titanovykh splavov [Melting and Casting of Titanium Alloys, ed. V.I. Dobatkin]. М., Metallurgiya Publ., 1978, 383 p. (In Russian).
  3. Poroshkovaya metallurgiya titanovykh splavov: sb. nauch. trudov [Powder Metallurgy of Titanium Alloys, eds. F.H. Frous, J.Е. Smugereski, transl. S.G. Glazunov]. М., Metallurgiya Publ., 1985, 263 p. (In Russian).
  4. Ustinov V.S., Olesov U.G., Drozdenko V.А., Antipin L.N. Poroshkovaya metallurgiya titana [Powder Metallurgy of Titanium]. М., Metallurgiya Publ., 1981, 248 p. (In Russian).
  5. Kobelev A.G., Lisak V.I., Chernyshev V.N., Kuznetsov E.V. Materialovedenie i tekhnologiya kompozitsionnykh materialov [Materials Science and Technology of Composite Materials]. М., Intermet Inzhiniring Publ., 2006, 365 p. (In Russian).
  6. Shteuer R. E. Mnogokriterialnaya optimizatsiya [Multiple Criteria Optimization: Theory, Computation and Application. New York, John Wiley, 1986, 546 p.]. M., Radio i svyaz Publ., 1992, 504 c. (In Russian).
  7. Kryuchkov D.I., Zalazinsky A.G. A hybrid modeling complex designed to optimize extrusion of inhomogeneous materials // Vestnik kompiuternykh i informatsionnykh tekhnologiy. – 2013. – No. 9. – P. 22–28. (In Russian).  
  8. Kryuchkov D.I., Zalazinskiy A.G., Berezin I.М., Romanova О.V. Modelling of compaction of titanium composite powders. Diagnostics, Resource and Mechanics of materials and structures, 2015, iss. 1, pp. 48–60. DOI: 10.17804/2410-9908.2015.1.048-060. Available at: http://dream-journal.org/issues/2015-1/2015-1_4.html
  9. Shchennikova Т.L., Zalazinsky G.G., Gelchinsky B.R., Romanova О.V., Rybalko О.F., Kryuchkov D.I,, Zalazinsky A.G., Berezin I.M. Investigation of VT22 powders and VT22-based powder materials. Perspektivnye materialy, 2015, No. 4, pp. 15–20. (In Russian).
  10. Moiseev V.N., Sysoeva N.V., Ermolova M.I. Heat treatment of granulated VT22 alloy. Metal Science and Heat Treatment, 1996, vol. 38, iss. 1–2, pp. 42–45. DOI: 10.1007/BF01153872.


PDF      

Article reference

Optimizing the Composition of a Composite to Be Pressed from a Noncompact Titanium-Based Raw Material / A. G. Zalazinskiy, D. I. Kryuchkov, A. V. Nesterenko, V. G. Titov // Diagnostics, Resource and Mechanics of materials and structures. - 2016. - Iss. 5. - P. 39-48. -
DOI: 10.17804/2410-9908.2016.5.039-048. -
URL: http://eng.dream-journal.org/issues/2016-5/2016-5_94.html
(accessed: 12/02/2024).

 

impact factor
RSCI 0.42

 

MRDMS 2024
Google Scholar


NLR

 

Founder:  Institute of Engineering Science, Russian Academy of Sciences (Ural Branch)
Chief Editor:  S.V. Smirnov
When citing, it is obligatory that you refer to the Journal. Reproduction in electronic or other periodicals without permission of the Editorial Board is prohibited. The materials published in the Journal may be used only for non-profit purposes.
Contacts  
 
Home E-mail 0+
 

ISSN 2410-9908 Registration SMI Эл № ФС77-57355 dated March 24, 2014 © IMACH of RAS (UB) 2014-2024, www.imach.uran.ru