D. I. Vichuzhanin, V. A. Khotinov, S. V. Smirnov

THE EFFECT OF THE STRESS STATE ON THE ULTIMATE PLASTICITY OF STEEL X80

The dependence of ultimate plasticity on the triaxiality parameter and the Lode-Nadai coefficient is obtained for steel X80. The fracture locus allows the plasticity of the investigated materials to be evaluated for the whole range of the Lode-Nadai coefficient. Cylindrical specimen tension, bell-type specimen tension and compression and membrane extrusion are used for fracture locus calibration. The results can be used for plasticity resource estimation for steels under a complex stress-strain state in main pipelines subject to extreme loads.

References:

1. Morozov Yu.D., Nastich S.Yu., Matrosov M.Yu., Chevskaya O.N. Obtaining high-quality properties of rolled material for large-diameter pipes based on formation of ferrite-bainite microstructure. Metallurgist, 2008, vol. 52, no. 1–2, pp. 21–28.
2. Arabey A.B. Requirements on the metal in gas pipelines. Steel in translation, 2010, vol. 40, no. 7, pp. 601–608.
3. Arabey A.B., Pyshmintsev I.Yu., Farber V.M., Khotinov V.A., Struin A.O. Failure of pipe steel of Х80 (К65) strength class. Steel in translation, 2012, vol. 42, no. 3, pp. 212–218.
4. Arabey A.B., Farber V.M., Pyshmintsev I.Yu., Glebov A.G., Selivanova O.V., Lezhnin N.V. Microstructure and dispersed phases in high-strength steels of gas large-diameter pipes. Nauka i technica v gazovoy promishlennosty, 2011, no. 4, pp. 86–91.(In Russian).
5. Rusakova V.V., Lobanova T.P., Arabey A.B., Pyshmintsev I.Yu. Organizing of complex research of domestic pipes for modern gas pipelines of new generation. Nauka i technica v gazovoy promishlennosty, 2009, no.1, pp. 17–21. (In Russian).
6. Pyshmintsev I.Y., Maltseva A.N., Gervasev A.M., Smirnov M.A., Korznikov A.V. Structure and properties of low-carbon pipe steelafter pneumatic testing. Steel in translation, 2011, vol. 41, no. 2, pp. 157–164.
7. Bridgman P.W. Studies in large plastic flow and fracture. McGraw-Hill, 1952, 362 p.
8. Atkins A.G. Fracture in forming. Journal of Materials Processing Technology, 1996, vol. 56, pp. 609–618.
9. Gubkin S.I. Deformiruemost metallov [Deformability of metals]. Moscow, Metallurgizdat Publ., 1953, 199 p.(In Russian).
10. Smirnov – Alyaev G.A., Rozenberg V.M. Teoriya plastichnykh deformatsyi metallov [Theory of metals plastic deformations]. Moscow, Mashgiz Publ., 1956, 367 p. (In Russian).
11. Bao Y., Wierzbicki T. On fracture locus in the equivalent strain and stress triaxiality space. International Journal of Mechanical Sciences, 2004, vol. 46, iss. 1, pp. 81–98.
12. Achouri M., Germain G., Dal Santo P., Saidane D. Experimental characterization and numerical modeling of micromechanical damage under different stress states. Materials and Design, 2013, vol. 50, pp. 207–222.
13. Wierzbicki T., Xue L. On the effect of the third invariant of the stress deviator on ductile fracture. Impact & Crashworthiness Laboratory, Cambridge, MA, MIT Press, 2005, Report 136.
14. Smirnov S.V. Accumulation and healing of damage during plastic metal forming: simulation and experiment. Key Engineering Materials, 2013, vol. 528, pp. 61–69.
15. Gorkunov E.S., Mitropolskaya S.Yu., Vichuzhanin D.I., Tueva E.A. Magnetic methods for estimation of load and damage levels in X70 steel. Physical Mesomechanics, 2011, vol. 14, iss.1–2, pp. 85–93.
16. Cachanov L.M. Time to fracture in creep conditions. Doclady AN SSSR, seriya OTN, 1958, no. 8, pp. 67–75.(In Russian).
17. Rabotnov Yu.N. Voprosy prochnosti materialov i konstruktsyi [Problems of the strength of metals and structures]. Moscow, АN SSSR Publ., 1959, 120 p.(In Russian).
18. Kolmogorov V.L. Napryazhenie, deformatsiya, razrushenie [Stresses, deformation, fracture]. Moscow, Metallurgiya Publ., 1970, 229 p.(In Russian).
19. Bogatov A.A., Mizhiritsky O.I., Smirnov S.V. Resurs plastichnosti metallov pri odrabotke davlenieniem [Metal plasticity resource under metal forming]. Moscow, Metallurgiya Publ., 1984, 144 p.( In Russian).
20. Smirnov S.V., Shveikin V.P. Plastichnost i deformiruemost uglerodistykh stalei pri odrabotke davlenieniem [Plasticity and deformability of carbon steels under metal forming].Ekaterinburg, YrO RAN Publ., 2009, 256 p.( In Russian).
21. Cockcroft M.G., Latham D.J. Ductility and the workability of metals. Journal of the Institute of Metals, 1968, vol. 96, pp. 33–39.
22. Gurson A.L. Continuum theory of ductile rupture by void nucleation and growth: Part I. Yield critetria and flow rules for porous ductile media. Journal of Engi-neering Materials and Technology, 1977, vol. 99, pp. 2–15.
23. Johnson G.R., Cook W.H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Engineering Fracture Mechanics, 1985, vol. 21 (1), pp. 31–48.
24. Lemaitre J. A Course on Damage Mechanics. Berlin, Springer-Verlag, 1992. 44 p.
25. Bai Y., Wierzbicki T. A new model of metal plasticity and fracture with pressure and Lode dependence. International. Journal of Plasticity, 2008, vol. 24, iss. 6, pp. 1071–1096.
26. Bammann D.J., Solanki K.N. On kinematic, thermodynamic, and kinetic coupling of a damage theory for polycrystalline material. International Journal of Plasticity, 2010, vol. 26, iss. 6, pp. 775–793.
27. Davidenkov N.N., Spiridonova N.I. Mechanical methods of testing analysis of the state of stress in the neck of a tension test specimen. Proc. ASTM, 1946, vol. 46, p. 1147.
28. Levanov A.N., Kolmogorov V.L., Burkin S.P. Kontaktnoe trenie v protsessakh obrabotki metallov davleniem [Contact friction in metal forming processes]. Moscow, Metallurgiya Publ., 1976, 416 p.(In Russian).
29. Smirnov S.V., Domilovskaya T.V., Bogatov A.A. In: Advanced Methods in Materials Processing Defects, by M. Predeleanu and P. Gilormini. Elsivier Science B.V, 1997, pp. 71–80.
30. Hooke R., Jeeves T. A Direct Search Solution of Numerical and Statistical Problems. Journal of the ACM, 1961, vol. 8, pp. 212–229.
31. Islamgaleeva L.F., Zaripov R.M. Influence of extent of ground flooding of adjacent un-derground sections on stress – strain state of underwater gas pipeline. Electronnyi nauchny zhurnal «Neftegazovoe delo», 2011, no. 6.  Available at: http://www.ogbus.ru/authors/Islamgaleeva/Islamgaleeva_1.pdf (accessed 21.07.2014). 
32. Suzuki N., Kondo J., Shimamura J. Strain Capacity of High – Strength Line Pipes. JFE Technical Report, 2008, no. 12, pp. 20–26. (In Russian).

                       

Article reference